Manual Ferm HDM1006 - FBH-1100K (page 6 of 42) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763650

Zoom out

Zoom in

1/42

Ferm 79

4. VEDLIGEHOLDELSE

Sørg for, at maskinen ikke er sluttet til strømmen, når der udføres vedligeholdelse

på de mekaniske dele.

Maskiner er beregnet til at fungere uden problemer i lang tid med et minimum af

vedligeholdelse. Med regelmæssig rengøring og korrekt behandling hjælper du med til at

sørge for, at din maskine får et langt arbejdsliv.

Fejlfunktioner

Maskinen bør med regelmæssige mellemrum efterses for følgende mulige fejl og om

nødvendigt repareres.

• Beskadiget netledning

• Ødelagt tænd/sluk-kontakt.

• Korslutning

• Beskadigede bevægelige dele.

Fejlfinding

• Motoren drejer ikke, når

den er tændt.

• Motoren laver for megen

støj og kører for langsomt

eller slet ikke.

• Overophedning i

transmissionskassen.

• Kraftig gnistdannelse fra

motoren.

• Fejl i strømforsyning.

• Dårlig forbindelse i

tænd/sluk-kontakten.

• For lav spænding.

• Beskadiget motor.

• Kulbørster slidte.

• Motoren er overbelastet på

grund af for stort tryk eller

for stor boredybde.

• Beskadiget motor.

• For lav

forsyningsspænding.

• Kulbørster slidte.

• Overophedning af

maskinen eller sløvt bor

• Nedsat spænding.

• Undersøg kulbørsterne for

slitage.

• Kontroller

strømforsyningen.

• Reparer eller udskift

tænd/sluk-

kontaktenheden.

• Forlængerledningen er for

lang eller for let.

• Få din maskine repareret af

en faguddannet tekniker.

• Udskift kulbørsterne.

• Nedsæt trykket eller

boredybden, nedsæt

styrken.

• Få din maskine repareret af

en faguddannet tekniker.

• Juster

forsyningsspændingen

• Udskift kulbørsterne.

• Nedsæt belastningen, eller

slib boret.

• Juster

forsyningsspændingen

06 Ferm

5. Carbon brush cap

6. Electric cord

7. Auxiliary handle

8. Depth gauge

9. Dust cap

10. Drill

11. Locking sleeve

12. Grease cap

2. SAFETY INSTRUCTIONS

In this operator's guide the following symbols are used:

Read instructions carefully

In accordance with essential applicable safety standards of European directives

Class II machine – Double insulation – You don’t need any earthed plug.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates electrical shock hazard.

Immediately unplug the plug from the mains electricity in the case that the cord

gets damaged and during maintenance

Wear ear and eye protection

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Specific safety instructions

• Wear ear protectors. Exposure to noise can cause hearing loss.

• Use auxiliary handles supplied with the tool. Loss of controle can cause personal injury.

For use of this machine/tool:

• Inspect the surface to be drilled for hidden electrical wiring, gas pipes or other obstacles

(for example, using a metal detector).

• Check the following points:

• Does the appliance’s voltage correspond with the mains power supply voltage?

• Are power cords, insulation and plug in good order: sound, not loose or damaged?

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HDM1006 - FBH-1100K in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HDM1006 - FBH-1100K Manual

Product: