Manual Ferm HAM1012 (page 4 of 76) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763716

Zoom out

Zoom in

1/76

can suffer hindrance of it;

• Before connecting the plug to the mains

voltage you have to check if the switch is in

position “0”;

• Keep the mains lead always away from the

mouthpiece of the hot air gun;

• Keep children and animals away from the

appliance if you are using it.

Immediately switch off the appliance when:

• Plug and/or cable are defective or damaged;

• The switch is defective;

• You smell or see smoke caused by scorched

insulation from the hot air gun.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class II machine – Double insulation –

You don’t need any earthed plug

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm2. When using a cable

reel always unwind the reel completely.

3. USING THE APPLIANCE

The Hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes;

• Removing paint, varnish and lacquer without

firerisk;

• Quickly drying of appliances which have

become wet;

• Drying surfaces for quick repairing;

• Removing self-adhesive labels in a clean way

placing PVC labels;

• Blistering after sticking PVC materials can be

smoothed after heating;

• Easy removing of vinyl carpeting:

• Forming all synthetics with a low temperature

(450 degrees) among which polyethylene and

PVC;

• Forming all synthetics with a high temperature

(580 degrees) among which acryl and plexiglass;

• Smelting synthetics, among which matters and

foils with PVC layer;

• Applying heat shrinking tubes;

• Shrinkwrappers;

• Thawing tubes and engines;

• Repairing finishing layers: email of bath and

household appliances;

• Applying epoxypowder coverlayers;

• Repairing of ski’s, surf-boards and other

sports goods;

• Unscrewing too fast fixed screws and

connections.

Operation

Fig. A

You can work manually with this hot air gun or you

can put it in a vertical position.

• Check if the mains switch is on position “0”

before you connect the apparatus;

• Keep the main lead always away from the hot

air stream and the mouth piece;

• Put the mains switch in position ‘I or II’ to let

your hot air gun operate:

“I” = 450 degrees, air flow 300 l/min.

“0” = Off

“II” = 600 degrees, air flow 500 l/min.

When the temperature is excess 600° C, the heats

switches it off automatically, however, the heater

continues to run. When the heater has cooled to

operating temperature, the heater is switched on

again.

Switching off:

Slide the switch to 0.

Tip: If you want to get the best result, test all

appliances on a little part of the workpiece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm HAM1012 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm HAM1012 Manual

Product: