Manual Ferm GRM1020 (page 6 of 16) (English)

632739

Zoom out

Zoom in

1/16

by the manufacturer. The use of other cleaning

agents or chemicals may adversely affect the

safety of the machine.

• Recommendtheoperatortowearear

protectors.

• Donotusethemachinewithinrangeof

persons unless they wear protective clothing.

• Donotdirectthejetagainstyourselforothers

in order to clean clothes or foot-wear.

• Riskofexplosion-Donotsprayflammable

liquids.

• Highpressurehoses,fittingsandcouplings

are important for the safety of the machine.

Use only hosed, fittings and couplings

recommended by the manufacturer.

• Toensuremachinesafety,useonlyoriginal

spare parts from the manufacturer or approved

by the manufacturer.

• Waterthathasflownthroughbackflow

preventers is considered to the non-potable.

• Themachineshallbedisconnectedfromits

power source by removing the plug from the

socket-outlet during cleaning or maintenance

and when replacing the machine to another

function.

• Observeadistanceofatleast30cmwhen

using the jet to clean painted surfaces to avoid

damaging paintwork.

• Donotusethemachineifasupplycordor

important parts of the machine are damaged,

e.g. safety devices, high pressure hoses,

trigger gun.

• Ifanextensioncordisused,theplugand

socket must be of watertight construction.

• Inadequateextensioncordscanbedangerous.

If an extension cord is used, it shall be suitable

for outdoor use, and the connection has to be

kept dry and off the ground. It is recommended

that this is accomplished by means of a cord

reel which keeps the socket at least 60mm

above the ground.

• Inordertoavoidahazardduetoinadvertent

resetting of the thermal cut-out, this

appliance must not be supplied through an

external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

• Toensurethemachinesafety,pleaseonly

use original spare parts (including nozzle)

from the manufacturer or approved by the

manufacturer. Do not use the machine before

you changed them if they are damaged.

• Becareofthedangerofthekickbackforceon

the spray assembly when opening the trigger

gun and grasp the gun with hands firmly.

• Toreducetheriskofinjury,closesupervision

is necessary when a machine is used near

children. High-pressure cleaner shall not be

used by children or untrained person.

• Knowhowtostopthemachineandbleed

pressures quickly. Be thoroughly familiar with

the controls.

• Stayalertandwatchwhatyouaredoing.

• Donotoperatethemachinewhenfatiguedor

under the influence of alcohol or drugs.

• Keepoperatingareaclearofallpersons.

• Donotoverreachorstandonunstable

support. Keep good footing and balance at all

times.

• Followthemaintenanceinstructionsspecified

in the manual.

• Thismachinemustbegrounded.Ifithas

malfunction or breakdown, grounding provides

a path of least resistance for electric current

to reduce the risk of electric shock. The

plug must be plugged into an appropriate

outlet that is properly installed and grounded

in accordance with all local codes and

ordinances. The rating voltage (V/Hz) of the

machine has to be in compliance with the local

power supplying voltage.

• Checkwithaqualifiedelectricianorservice

personnel if you are in doubt as to whether the

outlet is properly grounded. Do not modify the

plug provided with the machine. If it will not

fit the outlet, have a proper outlet installed by

a qualified electrician. Do not use any type of

adapter with this machine.

• Useonly3-wireextensioncordsthathave

3-prong grounding-type plugs and 3-pole

cord connectors that accept the plug from

the machine. Use only extension cords that

are intended for outdoor use and the socket

must be of watertight construction. These

extension cords are identified by a marking

“Acceptable for use with outdoor machines;

store indoors while not in use.” Use only

extension cords having an electrical rating

not less than the rating of the machine. Do

not use damaged extension cords. Examine

extension cord before using and replace if

damaged. Inadequate extension cords can

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm GRM1020 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm GRM1020 Manual

Product: