763694
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
EN
the cleaning agent supplied or recommended
by the manufacturer. The use of other cleaning
agents or chemicals may adversely affect the
safety of the machine.
Recommend the operator to wear ear
protectors.
Do not use the machine within range of
persons unless they wear protective clothing.
Do not direct the jet against yourself or others
in order to clean clothes or foot-wear.
Risk of explosion-Do not spray flammable
liquids.
High pressure hoses, fittings and couplings
are important for the safety of the machine.
Use only hosed, fittings and couplings
recommended by the manufacturer.
To ensure machine safety, use only original
spare parts from the manufacturer or approved
by the manufacturer.
Water that has flown through backflow
preventers is considered to the non-potable.
The machine shall be disconnected from its
power source by removing the plug from the
socket-outlet during cleaning or maintenance
and when replacing the machine to another
function.
Observe a distance of at least 30cm when
using the jet to clean painted surfaces to avoid
damaging paintwork.
Do not use the machine if a supply cord or
important parts of the machine are damaged,
e.g. safety devices, high pressure hoses,
trigger gun.
If an extension cord is used, the plug and
socket must be of watertight construction.
Inadequate extension cords can be dangerous.
If an extension cord is used, it shall be suitable
for outdoor use, and the connection has to be
kept dry and off the ground. It is recommended
that this is accomplished by means of a cord
reel which keeps the socket at least 60mm
above the ground.
In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this
appliance must not be supplied through an
external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
To ensure the machine safety, please only
use original spare parts (including nozzle)
from the manufacturer or approved by the
manufacturer. Do not use the machine before
you changed them if they are damaged.
Be care of the danger of the kickback force on
the spray assembly when opening the trigger
gun and grasp the gun with hands firmly.
To reduce the risk of injury, close supervision
is necessary when a machine is used near
children. High-pressure cleaner shall not be
used by children or untrained person.
Know how to stop the machine and bleed
pressures quickly. Be thoroughly familiar with
the controls.
Stay alert and watch what you are doing.
Do not operate the machine when fatigued or
under the influence of alcohol or drugs.
Keep operating area clear of all persons.
Do not overreach or stand on unstable
support. Keep good footing and balance at all
times.
Follow the maintenance instructions specified
in the manual.
This machine must be grounded. If it has
malfunction or breakdown, grounding provides
a path of least resistance for electric current
to reduce the risk of electric shock. The
plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances. The rating voltage (V/Hz) of the
machine has to be in compliance with the local
power supplying voltage.
Check with a qualified electrician or service
personnel if you are in doubt as to whether the
outlet is properly grounded. Do not modify the
plug provided with the machine. If it will not
fit the outlet, have a proper outlet installed by
a qualified electrician. Do not use any type of
adapter with this machine.
Use only 3-wire extension cords that have
3-prong grounding-type plugs and 3-pole
cord connectors that accept the plug from
the machine. Use only extension cords that
are intended for outdoor use and the socket
must be of watertight construction. These
extension cords are identified by a marking
“Acceptable for use with outdoor machines;
store indoors while not in use.” Use only
extension cords having an electrical rating
not less than the rating of the machine. Do
not use damaged extension cords. Examine
extension cord before using and replace if
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm GRM1017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm GRM1017 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info