Manual Ferm FPRS 1800 (page 5 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

110119

Zoom out

Zoom in

1/52

Ferm 5

• Wearaprotectivemaskwhensawingother

brousmaterials.

• Removeadjustingkeysandwrenches

before turning the tool on.

• Secureyourworkpiecewithclamps.

• Movemachinetowardstheworkpieceonly

when switched on.

• Alwaysholdmachinewithbothhandsand

ensure that you have a safe footing while

working.

• Themachinemaybeoperatedonlywiththe

foot plate mounted. When sawing, the foot

plate must always rest on the workpiece.

• Incorrecthandlingmaydamagethe

machine. Therefore always comply with the

following instructions.

• Useonlysharpsawbladesinperfect

condition; replace cracked, distorted or

blunt saw blades immediately.

• Machineshouldonlybeswitchedonwith

blade installed.

• Selecttools,strokerateandpendulum

actions according to material, Take care to

maintain a constant reed rate.

• Donotattempttostopthesawbladewith

lateral pressure after switching off.

• Onlyusegenuineaccessories.

3. MOUNTING ACCESSORIES

Prior to mounting an accessory always

remove the battery.

Assembling saw blade

Fig. B

To assemble the saw, proceed as follows:

• Slidethesawbuckleclamp(2)inwardand

hold.

• Placethesawinthesawbuckle.Makesure

that the teeth point downwards.

• Pushthesawasfarintothebuckleas

possible.

• Securethesawbygentlyreleasingthesaw

buckle clamp.

Adjusting the foot plate position

Fig. C

When the blade loses its sharpness at some

sections of it’s cutting edge, reposition the

foot plate to use a sharp, unused portion of its

cutting edge.

Besides this, the foot plate can also be used

for adjusting maximum saw depth, especially

useful when sawing in hollow walls.

• Thefootplatecanbeextendedbyloosening

the two footplate mounting screws (9) using

the 4 mm hexagon key and then pulling the

footplate out to the required length.

Ensure the footplate adjustment screws are

secure before resuming work.

Connecting and removing the battery

Fig. A+D

• Insertthebatteryintothebaseofthe

appliance, as shown on the illustration.

Pushthebatteryuntilitlatchesin.

• Pressthelockingbutton(8)oneitherside

before removing the battery, and disengage

the battery from the base of the appliance.

Onlyusebatteriesofthefollowingtype.Using

any other batteries could cause serious injury or

damage the tool.

• CDA1051: FPB-1800L, 18V Lithium-Ion

• CDA1053: FPB-1800N, 18V NiMH

The following chargers can be used to charge

these batteries.

• CDA1052: FPL-1800 (Lithium-Ion and

NiMH)

• CDA1054: FPL-1800N (NiMH only)

4. OPERATION

Always follow the safety notes and the

relevant safety code.

Make sure that the saw blade does not

rest on or touch any objects when the

machine is switched on.

Switching on and off

Fig. J

• Thismachineisequippedwithasafety

switch (5).

• Startthemachinebypressingthe“lockoff”

button (to disengage the switch) and switch

on the machine.

• Releasethe(On/Off)switch(7)toswitch

the machine off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FPRS 1800 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm FPRS 1800 Manual

Product: