110287

Ferm FPJS 1800 LK Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
GB
9
Ferm
Put the jig saw on the rounded front of the •
bottom plate.
Switch on the appliance and slowly lower the •
jig saw until it touches the work piece.
Let the jig saw cut into the work piece gently •
without forcing it.
When you are through the work piece, take •
the jig saw out of the hole.
Place the appliance in the normal position in •
the sawn hole and continue the saw cut.
You can also cut in by first drilling a hole in the
work piece. To do this, use a bit that makes a hole
big enough for the saw blade. Now you can carry
out the steps described under ‚Sawing‘.
LCD display
Fig. H
This machine is equipped with an LCD display:
To turn the display on, press the display button •
(13) once. To turn the display off, press the
display button again.
The clock (14) and minutes (15) remaining •
icons indicate the number of minutes of
running time that are available before the
battery requires recharging (Lithium-Ion
battery only)
The battery icon (16) indicates the amount of •
charge remaining in the battery. Each charge
bar displayed indicates approximately 10%
charge remaining in the battery. A total of 10
charge bars indicates a fully charged battery.
LED work light
Fig. I
Press the light button to switch the LED work light
on. Press the light button again to switch the LED
work light off.
Saw blade storage
Fig. J
Saw blades can be stored in the bottom plate:
Pull the bottom blade cover from the bottom •
plate.
Insert the saw blade in the bottom blade cover.•
Slide the bottom blade cover back into the •
bottom plate.
Hex key storage
Fig. K
The included hex key can be stored in the battery
compartment.
5. SERVICE & MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
The machines have been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you find
an exploded view showing the parts that can be
ordered.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material.
Therefore please make use of options for recycling
the packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Warranty
The warranty conditions can be found on the
separately enclosed warranty card.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm FPJS 1800 LK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FPJS 1800 LK in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info