Manual Ferm FMMS 120 (page 3 of 42) (English, German, Dutch, Danish, French, Italian, Norwegian)

79013

Zoom out

Zoom in

1/42

Ferm 0382 Ferm

MULTI MOTION SANDER

The numbers in the following text correspond with the pictures at page 2.

Important: Always read the instructions for electrical devices thoroughly before use. You will

have a better understanding of your product and avoid unnecessary risks. Keep these

instructions in good order for future use, keep them together with the device when transferring it

to a third party.

Use

This device is intended for polishing and sanding surfaces.

This device is not designed for wet sanding or commercial use

Contents

1. Machine data

2. Safety regulations

3. Assembly

4. Use

5. Service and maintenance

1. MACHINE DATA

Technical specifications

Package contents

1 Sanding and polishing machine

3 Polishing hoods (textile fleece)

3 Foam disks

3 x 3 Abrasive cloth disks (coarse, medium, fine)

1 Operating instructions

Voltage 230 - 240 V~

Frequency 50 Hz

Power consumption 120 W

Idle speed 200 - 400/min

Diameter of sanding/polishing disk 125 mm

Nominal diameter of accessories:

Abrasive cloth with Velcro fastener,

foam disks with Velcro fastener,

polishing hoods with Velcro fastener 125 mm

Weight 4.2 kg

Lpa (acoustic pressure) 77 dB(A)

Lwa (acoustic power) 88 dB(A)

Oscillation value 2.47 m/s

Protection class II

IP (protection against dust and water) IP 20

Spare parts list

Position Description Ferm No.

1 Sanding disc 400685

2 Bushing 400686

4, 5, 7, 9 Gear set including bearings 400687

14 Stator 400688

15 Rotor 400689

17 Carbon brush set 400690

24, 25, 26 Switch complete 400691

37 Joint with dust adapter 400692

38 Bearing for gears 800608

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FMMS 120 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm FMMS 120 Manual

Product: