Manual Ferm fmms 120 multi motion (page 6 of 42) (English, German, Dutch, Danish, French, Italian, Norwegian)

390115

Zoom out

Zoom in

1/42

Ferm 79

• Vask regelmæssigt polerehætten i hånden i lunkent vand med lidt finvaskemiddel, og lad

den lufttørre.

• Hvis du ikke bruger maskinen i en længere periode, skal du fjerne polerehætten fra

poleretallerkenen. Opbevar maskinen med poleretallerkenen vendende opad.

Fejl

Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på

garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan

bestilles.

Miljø

For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så

vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.

Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på

en genbrugsplads.

Garanti

Garantibetingelser er beskrevet på det separat vedlagte garantibevis.

CE KONFORMITETSERKLÆRING (DK)

Vi erklærer herved, udelukkende på eget ansvar, at dette produkt, FMMS-120, opfylder

følgende standarder eller standardiserede dokumenter:

EN60745-1, EN50144-1, EN50144-2-3, EN55014-1, EN55014-2, EN61000-3-2,

EN61000-3-3

i henhold til følgende direktiver:

98/37/EC, 73/23/EEC, 89/336/EEC, 2002/96/EC, 2002/95/EC

03-04-2006

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

FIN

06 Ferm

h. Damaged switches must be replaced at a customer service repair centre. Do not use

power tools that cannot be switched on and off.

i. Do not leave power tools unattended while they are switched on. Always switch off the tool

and wait until it has come to a full standstill before leaving.

j. If the mains cable has been damaged, it must be replaced with a special mains cable.

These can be obtained from the manufacturer or the manufacturer's customer service

department. The mains cable may only be replaced by the manufacturer, the

manufacturer's customer service department or equally qualified persons.

5. Service

a. Only allow your device to be repaired by qualified technicians and only use original

replacement parts. This ensures that the safety of the device is not degraded.

b. Damaged switches must be replaced by our customer service workshop.

c. If the connecting cable (or the power plug) is damaged, it must be replaced by a special

connecting cable, which is available from our customer service center. The connecting

cable may only be replaced by our customer service center or by a qualified electrician.

6. Special safety regulations for polishing and sanding machines

a. Important! Using accessories or add-on devices other than those recommended in these

operating instructions or included in the delivery kit can pose a hazard that may result in

bodily injury.

b. Always use two hands to hold the device when working.

c. Only switch the device on or off when the polishing or sanding disk is on the surface to be

polished or sanded. Do not leave the device unattended when it is running. Switch off the

device and wait for it to come to a complete stop before putting it down or leaving it

unattended.

d. Wear a dust-proof mask when sanding or dry polishing. Connect a vacuum. There is a

suitable adapter in the delivery kit.

e. Avoid using large amounts of polish, otherwise the polishing hood will cannot be easily

removed from the polishing disk. Follow the polish manufacturer’s instructions.

f. The sanding and polishing machine is not suitable for wet sanding.

g. If your hair is long, ensure that it is safely tucked away and covered. Do not wear loose-

fitting clothing when operating this device.

h. Always check to ensure that the supply voltage matches the voltage specified on the rating

plate.

i. If necessary, secure the workpiece that you want to sand or polish.

j. Use of extension cables. Only use extension cables that are designed for use with

powered devices. The wire diameter (cross-section) must be at least 1.5 mmÇ. When

using a cable spool, the cable must always be completely unrolled.

k. Before changing accessories, always pull the power plug.

l. Do not sand or polish any materials containing asbestos.

3. ASSEMBLY

See Fig. 2

Pull the power plug before working on the disks!

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fmms 120 multi motion in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm fmms 120 multi motion Manual

Product: