Manual Ferm fkb-13 650k (page 5 of 36) (English, German, Dutch, French, Italian)

386221

Zoom out

Zoom in

1/36

Ferm 05

• Keep the mains cable away from moving

parts of the machine.

• First switch off the machine before you move

the machine downwards along your body.

• Never cover the ventilation slots.

Immediately switch off the machine in case of:

• Excessive sparking of the brushes and

verticiliosis in the collector.

• Malfunction of the mainsplug, -socket or

damaged cables.

• Broken switch.

• Smoke or smell caused by scorched

insulation.

• On LIVE CIRCUITS, voltage testers that also

serve as screwdrivers may only be used to

test voltage and NOT for any other purpose.

• Do NOT use defective or damaged voltage

testers!

Electrical safety

Always check that the power supply

corresponds to the voltage on the rating

plate.

Your machine is double insulated;

therefore no earthwire is required.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. ASSEMBLY

Use only sharp drills of the following types

Fig.B

Concrete/masonry | Hard metal

Metal | HSS

Wood | HSS

Mounting accesories

Fig.C

Prior to mounting an accessory always

unplug the tool.

Placing and removing bits

In addition to bits the machine can also hold

screw bits with a hexagonal shaft.

• Loosen the chuck by rotating the handgrip

(A).

• Insert the drill/bit into the chuck.

• Tighten the chuck so that the drill/bit is firmly

clamped.

Voltage tester

Use

• Suitable for alternating current to a maximum

of 250 Volts.

• The voltage tester must be tested shortly

before use for correct operation.

• When used properly, the lamp in the handle

glows as soon as the voltage reaches 100 -

250 Volts and an earth connection is made.

• Correct operation of the tester is guaranteed

for temperatures from -10 °C to +50 °C and

for frequencies from 50 to 500 Hz.

Safety

• The voltages indicated on the voltage tester

are nominal voltages.

• The voltage tester may only be used within

the indicated voltage range.

• The visibility of the light emitted by the lamp

can be negatively influenced by the ambient

lighting conditions (for example, direct

sunlight) or unfavourable viewing conditions

(for example, while standing on a ladder).

• Indication is not guaranteed for insulated floors

and non-earthed alternating current circuits.

• In the event of precipitation (rain, dew, and so

forth) and damp areas, the voltage tester may

NOT be used.

4. USE

The On/Off switch

Fig.D

• Switch the machine on by pressing the

triggerswitch (A). When you release the

triggerswitch (A) the machine will turn off.

68 Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fkb-13 650k in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm fkb-13 650k Manual

Product: