79167
9
Zoom out
Zoom in
Previous page
1/44
Next page
Ferm 09
The cutting blades
Fig. 4
Aworn cutter blade will result in a poor cut, and will overload the motor. Always check the cutter
blade before you start using the machine. Have the cutter blade sharpened or replaced by a
specialist when so required.
Warning! Remove the plug from the socket, and wear protective gloves.
To remove the cutter blade (C) hold it tight to prevent it turning whilst unscrewing bolt (B) with
the spanner (A) supplied with the machine. Remove the cutter blade, and replace it with a new
one.
5. SERVICE & MAINTENANCE
Service & maintenance
Remove the plug from the socket before starting maintenance work!
Maintenance and cleaning
Regularly cleaning and maintaining the machine will improve its performance and prolong
its useful life.
Each time you have finished mowing, clean any grass and soil from the fan, cutter blade,
housing, and grass box.
Use only a damp cloth (hot water) and a soft brush to clean the machine. Make sure the
machine always stays dry!
Never use cleaning agents or solvents. These could cause irreparable damage to your
machine. Chemicals can attack plastic parts.
Applying an environmentally-friendly oil to the cutter blade will protect it from rust when the
machine is not used for a longer period.
Store the machine in a dry place, and out of the reach of children.
The upper section of the handle can be folded up to save space. Do not pinch the cord
when turning the machine!
Lubrication
The machine does not need any extra lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the
warranty card. In the back of this manual you find an exploded view showing the parts that can
be ordered.
Environment
To prevent damage during transport, the appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore please make use of options for recycling the
packaging.
GB
D
NL
F
E
P
I
S
FIN
N
DK
80 Ferm
1 Garantibevis
2. SIKKERHEDSBESTEMMELSER
Forklaring til symboler
I denne betjeningsvejledning er anvendt følgende symboler:
Læs bestemmelserne.
CE er i overensstemmelse med gældende europæiske sikkerhedsstandarder.
Klasse II maskine – Dobbelt isolering – Du behøver ingen jordforbindelsestik.
Overholdes anvisningerne ikke i denne betjeningsvejledning, kan det resultere i
personskade eller skader.
Sluk altid for maskinen, tag stikket ud af stikkontakten og vent til skærebladet er
holdt op med at dreje, før maskinen renses eller der udføres vedligeholdelse eller
reparation.
Brug altid sikkerhedsbriller, høreværn, sikkerhedssko og ekstra kraftigt arbejdstøj!
Brug ikke maskinen i vådt vejr.
De roterende skæreblade stopper øjeblikkelig, når der slukkes for maskinen. Hold
kroppen væk fra skarpe dele.
Tag øjeblikkelig stikket ud af stikkontakten, hvis stikket eller ledningen er
beskadiget.
Hold omkringstående på afstand.
Defekt og/eller kasseret elektrisk eller elektronisk værkstøj bør afleveres på en
genbrugsstation.
Særiges sikkerhedsforanstatninger
Strømforsyning
I forbindelse med brug af denne maskine anbefaler vi stærkt brugen af en
fejlstrømsafbryder (RCD - Residual Current Device) på højst 30 mAved stikkontakten.
Alle elektriske tilslutninger, f.eks. forlængerledningen, skal være af vandtæt type,
godkendt og afmærket som passende til udendørs brug. Forlængerledninger skal have tre
ledere, hvoraf en leder bruges til JORD.
GB
D
NL
F
E
P
I
S
FIN
N
DK
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm FGM 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FGM 1800 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 5,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info