Manual Ferm FFZ400 (page 2 of 22) (English, German, Dutch, French, Italian)

110147

Zoom out

Zoom in

1/22

Ferm 43

EXPLODED VIEW

FFZ-400N SCROLL SAW MACHINE

The following warning symbols are used in this operating

manual:

Danger of fatal injury and possible damage to

the machine if the instructions in this manual are

not observed.

An electric current is present.

Carefully read this operating manual before commissio-

ning the machine. Acquaint yourself with its function and

operation. Maintain the machine in accordance with the

instructions so that it will always work faultlessly. This ma-

nual and the accompanying documentation must be sto-

red near the machine.

SPECIAL SAFETY REGULATIONS

When using an electric machine, always observe the

local safety regulations with regard to the risk of fire,

electric shock and injury. In addition to the following

instructions, read the safety regulations in the rele-

vant special section.

• Always wear safety glasses and a dust mask.

• Use this scroll saw machine only indoors.

• Ensure that the teeth of the saw point downwards be-

fore using the machine.

• If any of the saw blade's teeth are missing or damaged,

immediately replace the blade.

• Instal the scroll saw machine on a level, stable surface.

• To avoid breaking the saw blade, never exert lateral

pressure on it.

• Before cutting, check wooden work pieces for protru-

ding nails etc.; remove any found.

• Do not touch the surface area to be sawed.

• Do not allow the saw machine to run unattended.

•When the machine is operational, wood remnants etc.

near the saw blade must not be removed by hand. De-

activate the machine before removing remnants.

TECHNICAL DATA

Voltage 230 V~

Frequency 50 Hz

Power consumption 90 W

Speed count w/o load/min 1440

Max saw depth 90° 50 mm

Max saw depth 45° 15 mm

Weight 15 kg

(sound pressure) w/load 62.6 dB(A)

(sound pressure) w/o load 66.4 dB(A)

Electrical safety

Check that the mains voltage corresponds to the voltage

listed on the rating plate.

Mains connection

Only use earthed sockets with earthing wire connected

per the regulations.

Replacing the mains connection cable

The mains connection cable may only be replaced by a

special cable in a specialised workshop.

Replacing cables or plugs

Dispose of old cables or plugs immediately after replacing

them. It is dangerous to connect the plug of a loose cable to

a wall socket.

Using extension cables

Only use an approved extension cable, corresponding to

the machine power use. The wires must have a minimum

cross section of 1.5 mm

. If the cable is on a reel, it must be

fully paid out.

CONTENT OF THE PACKING

1 scroll saw

1 protective cover

1 screw for installing the protective cover

2 saw blades

2 adapters for universal saw blades

2Allen key

1 dust blow pipe

3 rubber feet

3 screws with nuts and rings for installing the rubber feet

1cross guide

1 operating manual

1 safety manual

1 warranty card

Check the machine, loose parts and acces-

sories for transport damage.

English

2 Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FFZ400 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm FFZ400 Manual

Product: