Manual Ferm FDCD 1800 K2 (page 28 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

78366

Zoom out

Zoom in

1/48

Ferm

PERCEUSE SANS FIL

Les numeros du texte ci-apres font reference aux schemas de la page 2-3.

Lisez attentivement ce mode d’emploi avant la mise en service de l’appareil.

Familiarisez-vous avec le fonctionnement et la manipulation de l’appareil.

Entretenez l’appareil conformément aux instructions, afin qu’il fonctionne

parfaitement à chaque utilisation. Ce mode d’emploi et toute documentation

relative à l’appareil doivent être conservés près de celui-ci.

Table des matières

1. Données de l’apareil

2. Consignes de sécurité

3. Montage des accessoires

4. Utilisation

5. Service & maintenance

1. DONNÉES DE L’APAREIL

Spécifications techniques

Contenu de l’emballage

1 Perceuse sans fil

2 Batteries de type

1 Chargeur de batterie de type

2 Mèches de perçage doubles

1 Mode d’emploi

1 Consignes de sécurité

1 Carte de garantie

Tension 18 V

—

---

Tension du chargeur de la batterie 230 V

Fréquence du chargeur de la batterie 50 Hz

Capacité de la batterie 1.3 Ah

Temps de chargement 1-2 heures

Nombre de vitesses de perçage 2

Couple maximum (vitesse réduite) 15 Nm

Nombre de tours minutes à vide

Positie I 0-400/min

Positie II 0-1150/min

Mandrin 0.8 - 10 mm

Poids (batterie incluse) 2.0 kg

Lpa (pression acoustique) 80.0 dB(A)

Lwa (niveau de puissance acoustique) 91.0 dB(A)

Valeur de vibration 1.399 m/s

FIN

Ferm 69

AKKUPORAKONE

Tekstin numerot viittaavat kaavioihin sivuilla 2 - 3.

Lue tämä käyttöohje huolellisesti ennen laitteen käyttöönottoa. Tutustu laitteen

toimintatapaan ja käyttöön. Huolla laite ohjeiden mukaisesti, jotta se toimii aina

moitteettomasti. Käyttöohje ja siihen liittyvät asiakirjat on säilytettävä laitteen

läheisyydessä.

Sisältö

1. Laiteteentiedot

2. Turvaohjeet

3. Lisävarusteiden asennus

4. Käyttö

5. Kunnossapito ja korjaukset

1. LAITEENTIEDOT

Tekniset tiedot

Pakkauksen sisältö

1 Akkuporakone

2 Akkujen, tyyppi

1 Akkulatauslaite

2 Kaksipuoliset ruuvikärjet

1 Käyttöohje

1 Turvallisuusohjeet

1 Takuukortti

Tarkista kone, irralliset osat ja tarvikkeet kuljetusvahinkojen varalta.

Jännite 18 V

—

---

Jännite Akkulatauslaite 230 V

Taajuus Akkulatauslaite 50 Hz

Akun varauskyky 1.3 Ah

Latausaika 1-2 tunti

Porausnopeuksien lukumäärä 2

Max. vääntömomentti (Nopeus alhainen) 15 Nm

Kierrosluku, ilman kuormaa

Asento I 0-400/min

Asento II 0-1150/min

Poranistukan kiinnittäminen 0.8 - 10 mm

Paino (Akku mukaan luettuna) 2.0 kg

Lpa (äänenpaine) 80.0 dB(A)

Lwa (äänitehotaso) 91.0 dB(A)

Tärinäarvo 1.399 m/s

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FDCD 1800 K2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm FDCD 1800 K2 Manual

Product: