388955
7
Zoom out
Zoom in
Previous page
1/52
Next page
D
7
Ferm
Open the machine to inspect/replace the •
carbon brushes.
Remove and replace the carbon brushes if •
necessary.
Reassemble the rear handgrip.•
Cleaning
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia,
etc. Chemicals such as these will damage the
synthetic components.
Lubrication
Fig. E
Regularly grease the hammer drill shaft. •
Regularly check the grease-level inside the •
machine:
Remove the grease cap (12) on top of the •
machine.
Remove also the second cap (with 4 •
notches)
Now you can see the rotating parts inside •
the machine: there should be grease on
the moving parts.
If necessary put some grease into the •
hole.
Place the cap onto the hole and tighten it •
again.
Mount the grease cap again.•
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you find
an exploded view showing the parts that can be
ordered.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Warranty
For the conditions of warranty, please refer to the
separately provided warranty card.
BOHRHAMMER
Vielen Dank, dass Sie sich für den Kauf dieses
Ferm-Produkts entschieden haben.
Sie besitzen nun ein hervorragendes Produkt von
einem führenden europäischen Lieferanten.
Alle Ferm-Produkte werden nach höchsten
Leistungs- und Sicherheitsstandards gefertigt.
Gemäß unserer Philosophie bieten wir Ihnen
einen exzellenten Kundenservice sowie eine
vollständige Garantie auf unsere Produkte.
An diesem Produkt werden Sie noch viele Jahre
Ihre Freude haben.
Die Ziffern im nachstehenden Text verweisen
auf die Abbildungen auf Seite 2-3.
Lesen Sie diese Bedienungsanleitung
aufmerksam, bevor Sie die Maschine in
Betrieb nehmen. Machen Sie sich mit
der Funktionsweise und der Bedienung
vertraut. Warten Sie die Maschine
entsprechend der Anweisungen, damit
sie immer einwandfrei funktioniert. Die
Betriebsanleitung und die dazugehörige
Dokumentation müssen in der Nähe der
Maschine aufbewahrt werden.
Verwendung
Der FBH-850KN eignet sich zum Bohren von
Löchern in Mauerwerk aus Ziegel, Beton und
ähnlichen Materialien. Darüber hinaus kann die
Maschine in Kombination mit den mitgelieferten
SDS-Meißeln auch als Meißelhammer verwendet
werden. Die Maschine wurde ausschließlich für
diese Zwecke konzipiert.
Nicht geeignet für die Verwendung auf
Baustellen
Bitte überprüfen Sie Maschine und Zubehör auf
mögliche Transportschäden.
Inhalt
1. Gerätedaten
2. Sicherheithinweise
3. Betrieb
4. Wartung
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm fbh 850 kn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fbh 850 kn in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info