Manual Ferm fbh 1100 k (page 9 of 42) (English, German, Dutch, French, Italian)

388809

Zoom out

Zoom in

1/42

Ferm 09

4. MAINTENANCE

Take care that the machine is not connected to power whenever maintenance

work on the mechanical parts is taking place.

Our machines are designed to function problem-free for a long period with a minimum of

maintenance. Through regular cleaning and correct treatment, you help assure a long working

life for your machine.

Defects

The machine should be regularly inspected for the following possible defects, and repaired if

necessary.

• Damage to power cord

• Broken on/off trigger assembly.

• Short circuiting.

• Damaged moving parts.

Trouble shooting

• When switched on, the

motor does not turn.

• Motor generates

excessive noise, and

runs too slowly or not at

all.

• Overheating in the

transmission case.

• Heavy sparking from the

motor.

• Failure in power supply.

• Poor contact in the on/off

trigger.

• Mains voltage too low.

• Damaged motor.

• Carbon brushes worn.

• Motor is overloaded due

to excessive pressure or

drilling depth.

• Damaged motor.

• Supply voltage too low.

• Carbon brushes worn.

• Overloading of machine,

or blunt drill bit

• Reduced voltage.

• Inspect the carbon

brushes for wear.

• Check the power supply.

• Repair or replace the

trigger assembly.

• Extension lead too long,

or too light.

• Have your machine

repaired by an expert.

• Replace the carbon

brushes

• Reduce the pressure or

drilling depth, reduce

power.

• Have your machine

repaired by an expert.

• Adjust the supply

voltage.

• Replace the carbon

brushes

• Reduce the loading, or

hone the drill bit.

• Adjust the supply

voltage.

76 Ferm

3. Håndtag

4. Hammerfunktion

5. Kulbørstehætte

6. Elektrisk ledning

7. Støttehåndtag

8. Dybdemåler

9. Støvfilter

10. Bor

11. Sikkerhedsmuffe

12. Oliehætte

2. SIKKERHEDSANVISNINGER

I denne betjeningsvejledning er anvendt følgende symboler:

Læs instruktionerne omhyggeligt

I overensstemmelse med grundlæggende sikkerhedsstandarder i de europæiske

direktiver.

Klasse II maskine – Dobbelt isolering – Du behøver ingen jordforbindelsestik.

Betegnelse for risiko for personskader, dødsfald eller beskadigelse af værktøjet i

tilfælde af at du er uopmærksom på instruktioner i denne manual.

Indikerer farer for elektrisk stød

Tag straks stikket ud af stikkontakten, hvis ledningen beskadiges og i forbindelse

med vedligeholdelse

Brug beskyttelsesbriller og høreværn

Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på

en genbrugsplads.

Specifikke sikkerhedsanvisninger

• Bær høreværn. Udsættelse for støj kan forårsage tab af hørelse.

• Brug de ekstra håndtag, som leveres med værktøjet. Mistet kontrol kan forårsage

personskade.

Om brugen af denne værktøjsmaskine:

• Kontroller, at der under den overflade, der skal bores, ikke er skjulte elektriske ledninger,

gasrør eller andre forhindringer (for eksempel med en metaldetektor).

I have a Ferm HDM1100/FDH4004. I have had it from new and it still works perfectly. The problem I have is with the handle. I need part number 28 which fits around the drill collar. Are they available and if so can you advise me where I can get it? Submitted on 28-7-2019 at 15:08
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fbh 1100 k in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm fbh 1100 k Manual

Product: