388809

Ferm fbh 1100 k Manual

5
Zoom out
Zoom in
Previous page
1/42
Next page
Ferm 05
ROTARY HAMMER DRILL
The numbers in the following text correspond with the pictures at page 2 - 4.
Read this manual carefully, before using the machine. Ensure that you know how
the machine works, and how it should be operated. Maintain the machine in
accordance with the instructions, and make certain that the machine functions
correctly. Store this manual and other enclosed documentation with the machine.
Intended use
The FBH-1100K is intended for drilling holes in masonry such as brick, concrete and similar
materials. Furthermore, the machine can be used as a demolition hammer in combination with
the SDS cold chisels provided. The machine is on no account intended for other purposes.
Please inspect the machine and accessories for transit damage.
Contents
1. Machine information
2. Safety instructions
3. Operating
4. Maintenance
1. MACHINE INFORMATION
Technical specifications
Product information
Fig. A + F
1. Rotary stop selection lever
2. On-off Switch
3. Main handle
4. Hammer stop selection lever
Voltage 230 V
Frequency 50 Hz
Power rating 1100 W
Rotational speed, not loaded 750/min
Impact rate 2920/min
Max. bit diameter
Concrete Ø 30 mm
Steel Ø 16 mm
Wood Ø 40 mm
Weight 6.0 kg
Lpa (sound pressure level) 90.7 dB(A)
Lwa (sound power level) 105 dB(A)
Vibration value 4.3 m/s
2
GB
80 Ferm
Udskiftning ad kulbørster
• Udskift begge kulbørster samtidig.
• Kontroller regelmæssigt kulbørsterne for slitage og defekter.
• Udskift altid slidte kulbørster.
• Hold altid kulbørster rene og sørg for, at ingen af børsterne er blokeret.
• Åben maskinen for at inspicere/udskifte kulbørsterne.
• Fjern og udskift kulbørsterne om nødvendigt.
• Monter det bageste håndtag igen.
Rengøring
Rengør regelmæssigt maskinhusene med en blød klud, helst efter hver brug. Sørg for, at
ventilationsåbningerne er fri for støv og snavs. Fjern vedholdende snavs ved hjælp af en klud,
der er fugtet med sæbelud. Brug aldrig opløsningsmidler, som f.eks. benzin, sprit, salmiak
osv., da sådanne kemikalier beskadiger de syntetiske dele.
Smøring
Fig.G
• Smør regelmæssigt borehammerens aksel.
• Check olieniveauet regelmæssigt inden i maskinen:
• Fjern oliehætten (12) øverst på maskinen (Off)
• Fjern også den anden hætte (med 4 hak)
• Du kan nu se de roterende dele inden i maskinen: Der bør være olie på de bevægende
dele.
• Hæld noget olie i hullet hvis nødvendigt.
• Placér hætten på hullet og stram den igen.
• Montér oliehætten på igen (On)
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan bestilles.
Miljø
For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på
en genbrugsplads.
Garanti
Se venligst garantibetingelserne på garantikortet, som er vedlagt separat.
DK
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ferm-fbh-1100-k

Reset search

  • I have a Ferm HDM1100/FDH4004. I have had it from new and it still works perfectly. The problem I have is with the handle. I need part number 28 which fits around the drill collar. Are they available and if so can you advise me where I can get it? Submitted on 28-7-2019 at 15:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm fbh 1100 k at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fbh 1100 k in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info