Ferm 9
OPERATIONAL SAFETY
Warning! Be aware this planer can produce fine
dust, which can be hazardous to your health.
Always use a suitable mask, eye protection, and other
personal protection equipment. Use dust extraction during
working and cleaning.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids,
vapours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD
(residual current device) to provide protection against
electrical shock. Prevent body contact with grounded
surfaces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of
a heavy-duty tool. Do not use tools for purposes for
which they were not intended; for example do not use a
circular saw for cutting trees or logs.
Do not abuse the cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from
heat, oil and sharp edges. Do not touch the metal plug
pins when connecting or removing the plug.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters.
Always switch off and unplug the planer from the
power supply before making adjustments or
changing belts.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before
switching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.
Extension cables
Use only three core earthed extension cables suitable
for the power input of the tool (minimum cable size
1.5mm
2
). Plug into an earthed socket only.
When using a cable reel unwind it fully. Do not use long
extension cables.
Outdoors use
If the tool is suitable to be used outdoors, only use an
extension cable intended for outdoor use and marked
accordingly. Use a RCD (residual current device) to
provide protection against electrical shock. Do not use
in rain or damp conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust or fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of an accessory or attachment other than
recommended in the instructions or catalogue may
present a risk of personal injury. Use an extension cable
with a minimum conductor size of 1.5mm
2
.
When using a cable reel unwind it fully.
4 Ferm
