Manual Ferm fag 180 (page 3 of 18) (English, German, Dutch, Danish, French, Italian, Norwegian)

390603

Zoom out

Zoom in

1/18

Ferm 3

TECHNICAL SPECIFICATIONS

Voltage 230 V~

Frequency 50 Hz

Power input 1650 W

No-load speed 8000/min

Disc diameter 180 mm

Spindle dimension M14

Weight 3.75 kg

(sound pressure) 94.6 dB(A)

(acoustic power) 107.6 dB(A)

Vibration value 0.8 m/s

Electrical safety

Always check that the power supply corre-

sponds to the voltage on the rating plate.

Your machine is double insulated in accordance

with EN 50144; therefore no earthwire is requi-

red.

Replacing cables or plugs

Immediately throw away old cables or plugs when they

have been replaced by new ones. It is dangerous to insert

the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the

power input of the machine. The minimum conductor size

is 1.5 mm

. When using a cable reel always unwind the reel

completely.

PACKAGE CONTENTS

The package contains:

1 angle grinder

1 side handle

1 spanner

Set carbon brushes

instruction manual

safety instructions

guarantee card

Check the machine, loose parts and accessories for trans-

port damage.

PRODUCT INFORMATION

Fig. A:

1. on/off switch

2. screw-on lid carbon brush (both sides)

3. spindle lock

4. grinding disc

5. side handle

6. lock-off button

3 2 1 6

34 Ferm

SPARE PARTS LIST

REF.NR. DESCRIPTION FERM NR.

4 FLANGE OUTSIDE 406847

6 FLANGE INSIDE 406846

16 SPINDLE GEAR 406754

23 PINION GEAR 406756

26 WOODRUFF KEY 406752

32 ROTOR 406757

39 BRUSH CAP 406758

41 CARBON BRUSH 406759

42 CARBON BRUSH HOLDER 406760

45 SWITCH 406761

47 CAM WRENCH 406762

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm fag 180 in the language / languages: English, German, Dutch, Danish, French, Italian, Norwegian as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm fag 180 Manual

Product: