510088
7
Zoom out
Zoom in
Previous page
1/92
Next page
7
EN
USE

● Toswitchonthemachine,presstheon/off
switch (1).
● Toswitchoffcontinuousmode,pressthe
on/off switch (1) again.

The speed adjustment wheel is used for setting the
speed. The speed adjustment wheel can be set to 6
positions.Theidealspeeddependsontherequired
grainsizeandonthematerialtobeworked.
2
Do not set the speed during use.
● Turnthespeedadjustmentwheel(3)tothe
requiredposition.
- For hard materials, use sanding paper with
anegrainsizeandselectalowerspeed.
- For soft materials, use sanding paper with a
coarsegrainsizeandselectahigherspeed.

● Insertthedustbag(9)intothedustbag
connection (7).
● Turnthedustbag(9)clockwiseuntilitlocks
into place.
Hints for optimum use
● Clamptheworkpiece.
● Firmlyholdthemachinewithbothhands.
● Switchonthemachine.
● Placethesandingpadwithsandingpaperon
the workpiece.
● Slowlymovethemachineovertheworkpiece,
rmlypressingthesandingpadagainstthe
workpiece.
● Donotapplytoomuchpressureonthe
machine. Let the machine do the work.
● Switchoffthemachineandwaitforthe
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
4
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
● Regularlycleanthesandingpadtoavoid
inaccuracies during use.

● Toremovetheoldsandingpaper(8),proceed
as described in the section
„Mountingandremovingthesandingpaper“.
● Tomountthenewsandingpaper(8),proceed
as described in the section
„Mountingandremovingthesandingpaper“.

In case of wear, the sanding pad must be replaced.
● Ifnecessary,removethesandingpaper.
● Loosenthescrews(10)fromthesandingpad
(4).
● Removetheoldsandingpad(4).
● Mountthenewsandingpad(4).
● Tightenthescrews(10)tothesandingpad(4).
WARRANTY
Consulttheenclosedwarrantyterms.
ENVIRONMENT
Disposal
8
The product, the accessories, and the packaging
must be sorted for environmentally friendly
recycling.

Donotdisposeofpowertoolsintodomestic
waste. According to the European Guideline
2002/96/ECforWasteElectricalandElectronic
Equipmentanditsimplementationintonational
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product and the user manual are subject to
change.Specicationscanbechangedwithout
further notice.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm ESM1009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ESM1009 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info