632719

Ferm EHM1001 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
EN
6 Ferm
Note:
The fan will start as soon as the equipment is
switched on. The equipment will only heat up when
the room temperature falls below the temperature
set on the thermostat and the heat output switch is
on.
Switch on the required heating output (1). Turn the
control (2) to “max” until the required room
temperature has been reached. Then turn down the
control until you hear a clear click. The thermostat
will switch the heating element on and off
automatically.

In case of excessive heating, the heating function
shuts down automatically. The fan will restart. If this
occurs, turn off the equipment, disconnect the
mains plug and wait a few minutes for the
equipment to cool. After eliminating the cause (e.g.
a covered air grille), the equipment can be switched
on again.

After the hot equipment has been switched off (by
turning the heat output switch to “0”) the fan may
continue to run for a while to cool the equipment.
However, if the fan continues to run for more than
10 minutes, this is a sign that it cannot cut out
automatically because of the high room
temperature. In this case you must pull out the
power plug.

Cleaning
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a soft
cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.

Store the equipment and accessories out of
children’s reach in a dark and dry place at above
freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the
equipment in its original packaging.

Should a fault occur, e.g. after wear of a part,
please contact the service address on the warranty
card. In the back of this manual you will find an
exploded view showing the parts that can be
ordered.

To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please make
use of options for recycling the packaging.
Damaged and/or disposed of electrical or
electronic devices must be dropped off at
recycling stations intended for that
purpose.

For the conditions of warranty, please refer to the
separately provided warranty card. The product
and the user manual are subject to change.
Specifications can be changed without further
notice.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm EHM1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm EHM1001 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info