764207

Ferm EBM1004P Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
5
EN
immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
• Do not carry the appliance by the cable.
• Keep all nuts, bolts and screws tight to be sure
the appliance is in safe working condition.
• Disconnect the appliance from the mains
supply
• whenever you leave the machine;
• before clearing a blockage;
• before checking, cleaning or working on the
appliance;
• if the appliance starts to vibrate abnormally.
• Check the dust bag frequently for wear or
deterioration.
• Replace worn or damaged parts.
• Use only genuine replacement parts and
accessories
• Store the appliance only in a dry place.
Electrical safety
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Read all these instructions before attempting to
operate this product and save these instructions.
Always check that the power supply
corresponds to the voltage on the rating
plate.
The machine is double insulated in
accordance with EN60745; therefore no
earth wire is required.
Replacing cables or plugs
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm2. When using a cable
reel always unwind the reel completely.
2. MACHINE INFORMATION
Intended use
The blower has been design for blowing &
cleaning applications as well as for light suction
purposes.
Technical specifications
Voltage 220 - 240 V~
Frequency 50 Hz
Power input 600 W
No load speed 0-13.900/min
Max. air speed 4.1 m3/s
Nozzle diameter 30 mm
Sound pressure (Lpa) 82.1 dB(A) k=2.5 dB(A)
Sound power (Lwa) 95 dB(A) k=2.5 dB(A)
Vibration 2.994 m/s2 k=1.5 m/s2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60335; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Description
The numbers in the text refer to the diagrams on
pages 2-3
1. Outlet
2. On/Off Switch
3. Lock-on button
4. Suction port
5. Nozzle
5a. Nozzle extension piece
6. Dust bag
8. Variable speed wheel
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm EBM1004P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm EBM1004P in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info