763693

Ferm CTM1018 Manual

10
Zoom out
Zoom in
Previous page
1/52
Next page
10
EN
“Recommended speed setting” below to determine
the correct speed, based on the material being
worked on and the type of accessory being used.
This overview enables you to select both correct
accessory and the optimum speed.
The 5 speeds indication lights (6) are equal to
the numbers 1, 2, 3, 4 and 5 in the overview
“Recommended speed setting”.
Ultimately, the best way to determine the correct
speed for work on any material is to practice on a
piece of scrap.
Recommended speed setting
Grinding stones
Fig. 4
Material Speed setting
Stone, shell 1-3
Steel 3-5
Aluminium, brass 2-4
Plastic 1-3
Felt wheels and tip
Fig. 5
The felt wheels or tip should be screwed on the
mandrel.
Material Speed setting
Steel 3-5
Aluminium, brass 2-4
Plastic 3-5
Sanding bands and disc
(sanding disc not included)
Fig. 6
Material Speed setting
Wood 4-5
Steel 1-3
Aluminium, brass 2-4
Plastic 1-3
Bristel brush
Fig. 7
Material Speed setting
Stone, shell 2-4
Aluminium, brass 2-4
High speed cutter, Diamond wheel point and
Drill
Fig. 8
Material Speed setting
Stone, shell 5
Steel 2-4
Aluminium, brass 4-5
Plastic 1-3
Abrasive disc
Fig. 9
Material Speed setting
Steel 3-5
Aluminium, brass 2-4
Plastic 1-3
5. MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
Keep the ventilation slots of the machine clean to
prevent overheating of the engine. Regularly clean
the machine housing with a soft cloth, preferably
after each use. Keep the ventilation slots free from
dust and dirt. If the dirt does not come off use a
soft cloth moistened with soapy water. Never use
solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
Please clean the tool immediately after use.
ENVIRONMENT
Damaged and/or disposed of electrical
or electronic devices must be dropped
off at recycling stations intended for that
purpose.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CTM1018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CTM1018 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info