762265
5
Zoom out
Zoom in
Previous page
1/140
Next page
5
EN
PRECISION CIRCULAR SAW
CSM1043 - 500W, Ø85mm
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-4
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always func-
tions properly. The operating instructions
and the accompanying documentation
must be kept in the vicinity of the device.
Introduction
This saw is intended for sawing different types of
thin material for home use. The Precision Circular
Saw can be used when it is necessary to saw
accurately and when it is not desirable to create
any dust, or if there is a risk of sawing pipes or
cables. The Precision Circular Saw is unique
because the material to be sawn is clamped by the
saw between the base plate and the work bench.
The blade is then pushed into the material to be
sawn to produce a quick, easy and clean result.
1. MACHINE DATA
Technical specifications
Voltage 230-240 V~50 Hz
Power 500 W
Sawing depth 0-22 mm
No load speed 3500-6500/min
Weight 1.7 kg
Max. blade diameter 85 mm
Bore 15 mm
Lpa (Sound pressure level) 95 dB(A) K=3 dB(A)
Lwa (Sound power level) 106 dB(A) K=3 dB(A)
Hand-arm vibration ah,W 2.63m/s2 K=1,5m/s2
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns
Blade specifications
Included with the machine are three different type
blades:
1 General long-life 24T TCT blade for wood and
plastics
1 Diamond blade for ceramics (dry cut)
1 Fine 44T HSS blade for wood and plastics
Product information
Fig.1-5
1. Protective cover
2. Handle
3. Saw depth limiter
4. On/Off switch
5. Handgrip
6. Rear ventilation hole
7. Speed adjustment
8. Dust extraction pipe
9. Depth indicator
10. Sawblade
11. Cap nut
12. Parallel guide
13. Adjustment knob
14. Spindle lock button
15. Mounting flange
16. Clamping nut
17. Hex key
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1043 in the language / languages: All languages as an attachment in your email.

The manual is 8,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info