465139

Ferm CRM1037 Compressor Manual

6
Zoom out
Zoom in
Previous page
1/36
Next page
EN
6 Ferm
reach high temperatures. Do not touch these
parts to avoid burns (fig. 12-13).
Transport the compressor by lifting it or by •
using the special grips or handles (fig. 5-6).
Children and animals should be kept far away •
from the area of operation of the machine.
If you use the compressor to spray paint:•
a) Do not work in enclosed spaces or near naked
flames.
b) Make sure that the environment in which you
will be working has dedicated ventilation.
c) Protect your nose and mouth with a dedicated
mask (fig. 21).
Do not use the compressor when the electrical •
cable or the plug is damaged, and instruct an
authorised Support Service to replace them
with an original part.
When the compressor is placed on a surface •
higher than the floor, it should be secured to
prevent it from falling down during operation.
Do not put objects or your hands in the •
protective covers to avoid physical damage
and damage to the compressor.
Do not use the compressor as a blunt •
instrument against persons, objects or
animals in order to prevent serious damage.
If the compressor is no longer in use, always •
take the plug out of the plug socket.
Always make sure that compressed-air hoses •
are used for compressed air and which are
characterised by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.
Electrical safety
Earthing regulations
This compressor has to be earthed while in use in
order to protect the operator against electrical
shocks. The compressor is provided with a two-
core cable plus an earth. The electrical connection
has to be made by a qualified technician. We
recommend never disassembling the compressor
and neither making any other connections into the
pressure regulator. Repairs should be carried out
by authorised Support Services or by other
qualified centres.
Never forget that the earthing core is the
green or the yellow/green wire. Never
connect this green wire to a terminal
under load.
Before replacing the plug of the feed, make sure
that the earth cable is connected. If in doubt,
please call in a qualified electrician and have the
earthing checked.
Electrical connection
Always check whether the input voltage of the
motor corresponds to the mains voltage indicated
on the specification plate. The compressors are
supplied with an electrical cable and a two-pole
plug + earth. It is important to connect the
compressor with an earthed plug socket. (fig. 9)
Never use the earth-wire instead of the
neutral (0-wire). The earthing should take
place in accordance with accident
prevention regulations.
3. USE
For homehold use only
NB: The information you will find in this manual
has been written to assist the operator in the use
and maintenance of the compressor. Some
illustrations in this manual show details which may
differ from those of your compressor.
Installation
After having taken the compressor out of its
packaging (fig. 1) and having checked that it is in
perfect condition, and having noted that no
damage occurred during transport, the following
acts should be performed. If not yet fitted, fit the
rubber feet and the wheels on the tank according
to the instructions represented in fig. 2. Place the
compressor on a flat surface or at a maximum
slope of 10° (fig.3), in a well ventilated area,
protected against atmospheric factors and not in
explosive surroundings. If the surface area is
sloping and smooth, make sure that the
compressor will not move when in operation. If the
surface area is a board or a shelf of a bookcase,
just make sure that they cannot fall down by
securing them properly. For proper ventilation and
effective cooling, it is important that the
compressor is positioned at least 100 cm from the
wall (fig. 4).
Make sure that the compressor is
transported in the right way, do not turn it
upside down and don’t lift it with hooks or
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CRM1037 Compressor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1037 Compressor in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info