538654
5
Zoom out
Zoom in
Previous page
1/26
Next page
48 Ferm
Kompressoren køre men komprimere ikke
Fig. 19
Kan være forårsaget af ventilerne (C-C2) eller
en pakning (B1-B2) som er ødelagt.
Udskift de ødelagte dele.
Kompressoren vil ikke starte
Hvis kompressoren er svær at starte, check:
Om hovedspændingen stemmer overens med
den på typepladen (fig. 10)
Om elektriske forlængerledninger anvendes
med en kernefejl eller længdefejl.
Om arbejdsmiljøet for for koldt (under 0°C).
Om der strømforsyning (stik korrekt forbundet,
magneto termiske sikringer ikke er ødelagte).
Kompressoren vil ikke slukke
Hvis kompressoren ikke slukkes når det
maksimale tryk er opnået, vil sikkerhedventilern
på tanken aktiveres.
Det er nødvenligt at kontakte den nærmeste
autoriserede support servicevirksomhed for
reparation.
Rengøring
Kappen omkring motoren skal rengøres med en
blød klud, helst hver gang maskinen har været
brugt. Ventilationsrillerne skal holdes fri for støv
og snavs. Hvis snavset ikke vil gå af, bruges en
blød klud vredet op i sæbevand. Der må ikke
bruges opløsningsmidler som f.eks. benzin, sprit,
salmiakspiritus o.l. Sådanne opløsningsmidler
kan beskadige dele af plastic.
Smøring
Det er anbefalet at skille sugefiltret ad hver
50ende driftstime, og rengøre filterelementet ved
at puste det ved lufttryk (fig. 15). Det er anbefalet
ar filterelement udskiftes mindst to gange hvert år
hvis kompressoren arbejder i et rent miljø; ofterer
hvis arbejdsmiljøet er støvet. Kompressoren
udvikler kondensvand som samles i tanken.
Det er nødvendigt at fjerne kondensvand i tanken
mindst én gang om ugen, ved at åbne aftapnings-
hanen (fig. 16) under tanken. Vær forsigtig når
trykluft er i flasken, da vand kan komme ud under
stort tryk. Anbefalet tryk maks. 1-2 Bar.
Fejl
Skulle en fejl opstå, f.eks. pga. slidtage af en
enhed, kontakt venligst serviceadressen på
garantibeviset. På bagsiden af denne manual
finder du en tegning med alle dele, der kan
bestilles.
Miljø
For at undgå transportbeskadigelse leveres
m
askinen i en solid emballage. Emballagen er så
vidt muligt lavet af genbrugsmateriale. Genbrug
derfor emballagen.
Defekte og/eller kasserede elektriske
eller elektroniske maskiner skal
afleveres på en genbrugsplads.
Garanti
Garantibetingelser er beskrevet på det separat
vedlagte garantibevis.
DK
Ferm 05
COMPRESSOR
The numbers in the following text correspond
with the pitcures at page 2 - 3.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine details
2. Safety instructions
3. Use
4. Maintenance
1. MACHINE DETAILS
Technical specifications
The value of the noise level may rise from 1 to 10
dB(A) as a function of the environment in which
the compressor will be installed.
Product information
Fig. A
1 Cover
2. Handle
3. Switch
4. Automatic stop
5. Pressure regulator
6. Quick coupler (outlet)
7.
Pressure gauge (pressure regulator)
8. Pressure gauge (tank)
9. Drain cock
2. SAFETY INSTRUCTIONS
Explanation of symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Risk of electric shock.
Caution: the compressor could start
automatically in case of a black-out and
subsequent reset
Wear ear protection.
Sound power level
Special safety instructions
Warning! The compressor may only be used
in suitable rooms (with good ventilation and an
ambient temperature from +5°C to +40°C).
It is recommended to use the compressor with
a maximum operation of 70% in one hour
under full load, to allow for proper operation of
the product over time.
Check that the tank is fully decompressed
before connections with the tank are
unscrewed.
It is prohibited to make holes in, or welds to,
or purposely to distort the compressed air
tank.
Do not perform any actions on the compressor
without first having taken the plug out of the
plug socket.
Do not aim water jets or jets of flammable
liquids at the compressor.
Do not place flammable objects near the
compressor.
Switch the pressure regulator to the "0"
position (OFF = uit) during dwell time.
Never aim the air jet at persons or animals
(fig. 20).
Do not transport the compressor with the tank
pressurised.
N.B.: some parts of the compressor such as
the head and the feed-through pipes may
reach high temperatures. Do not touch these
parts to avoid burns (fig. 12-13).
T
ransport the compressor by lifting it or by
Voltage 230 V~
Frequency 50 Hz
Capacity 1.5 hp (1100 W)
Idling speed 3400/min
IP Class IP 20
Tank contents 24litre
Air intake 180 l/min
Max. outlet pressure 8.0 Bar
Weight 23.0 kg
Sound power level 97.0 dB (A)
GB
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CRM1034 FCO-1524N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1034 FCO-1524N in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info