Manual Ferm CDM1108S (page 8 of 120) (All languages)

632673

Zoom out

Zoom in

1/120

Lithium-Ion cells can be stored for a long

period without losing much of their

charge. When the machine is not being

used over a longer period of time it is

best to store the battery in charged

condition.

Fitting and removing drills or screwdriver bits

Fig. D



and screwdriver bits with a standard ¼ inch.

hexagonal shaft. To fit a screwdriver bit:

 

 



magnet.

 

it out of the bit holder again.

 

screws that are difficult to reach. Put it directly

into the machine’s bit holder.

Adjusting the direction of rotation

Fig. E

 <<’ in

order to drive screws or to use it for drilling.

 >>’ in

order to remove screws.

Switching the machine on and off

Fig. E



machine.

 

machine.

 

machine.

 

position to lock the movement of the on/off

switch. It cannot be activated in this position.

The machine is equipped with electronic

overload protection function. When the

machine gets overloaded it will shut

down automatically. When this happens,

please wait for at least 5 seconds to let

the overload protection reset itself.

Spindle lock function

Fig. F

The machine is fitted with an automatic spindle







the battery is empty) as a manual tool.

Work light (7)

Fig. A

The machine is equipped with a work light to

illuminate the work location.

 

switch is being pressed.

 

switch is released again.

User tips

When driving screws into wood, metal and other

materials:

 

screw bit is properly fitted and centered inside

the drill chuck.

 

dimensions. When unsure, always try if the bit

fits on the screw head without any free play

before using the machine.

 

it contacts the screw. A rotating bit may slip.

This could result in damage to the work piece.

 

straight line with the screw.

 

small amount of washing liquid or soap as a

lubricant to the screws thread.

 

tight screws or to firmly tighten screws.

 

to drill a hole with a depth equal to almost the

length of the screw. A pilot hole guides the

screw and prevents splintering or distortion of

the work piece.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1108S in the language / languages: All languages as an attachment in your email.

The manual is 14,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1108S Manual

Product: