Manual Ferm CDM1093 FDCD-1440LKN (page 8 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

538955

Zoom out

Zoom in

1/56

Ferm

Only lay down the appliance when it has stopped

running completely. Do not place it on a dusty

surface as particles of dust could get into the

mechanism.

Charging the battery

The included battery is delivered in partly •

charged condition.

Only use the battery charger in a temperature •

range between + 5 °C to + 40 ºC.

Only use the battery charger in dry, ventilated •

rooms.

Charging

Fig. F

One advantage of using Lithium-Ion batteries is

that, until the battery is almost empty, hardly any

power fading is noticeable. The machine can be

used until you start noticing that the power of the

drill is elapsed. The battery is discharged now

and needs to be charged.

Remove the battery from the tool.•

Put the adapter plug of the net adapter in the •

connector on top of the battery.

Put the net adapter in the socket.The red •

charging LED on the net adapter will illuminate

indicating the battery is being charged.

When the battery is charged the red LED will •

change into green.

The charging process of a fully discharged •

battery will take approximately 5 hours the first

time and afterwards approximately 3-5 hours.

After the charging time the red light will

switch to green! Remove the battery

within 5 hours from the charger.

In comparison to NiCd and NiMH cells,

Lithium-Ion cells have no memory effect due

to intermedial charging. While NiCd and NiMH

batteries need to be discharged before charging,

a Lithium-Ion block does not need to completely

discharged. This battery block can be charged at

any time despite its current power level without

losing much of its original power and endurance.

The charger is equiped with a special plug. This

Lithium-Ion battery pack is only to be charged

with this dedicated charger. The integrated

electronics in this dedicated charger is custom

made for this Lithium-Ion battery pack. Using

other chargers/adapters will cause irreversible

damage to the battery.

Lithium-Ion cells can be stored for a

long period without losing much of their

charge. When the machine is not being

used over a longer period of time, it is

best to store the battery in charged

condition.

. SERVICE & NTNCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

These machines have been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Cleaning

Keep the ventilation slots of the machine clean

to prevent overheating of the engine. Regularly

clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation

slots free from dust and dirt. If the dirt does not

come off use a soft cloth moistened with soapy

water. Never use solvents such as petrol, alcohol,

ammonia water, etc. These solvents may damage

the plastic parts.

Lubrication

The machine requires no additional lubrication.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. In the back of this manual you find

an exploded view showing the parts that can be

ordered.

Environment

To prevent damage during transport, the

appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore

please make use of options for recycling the

packaging.

Faulty and/or discarded electrical or

electronic apparatus have to be

collected at the appropriate recycling

locations.

Warranty

The warranty conditions can be found on the

separately enclosed warranty card.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1093 FDCD-1440LKN in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1093 FDCD-1440LKN Manual

Product: