Manual Ferm CDM1066 FDC-1200K2 (page 7 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

538816

Zoom out

Zoom in

1/48

Ferm 07

• Only use the battery block supplied in combination with this cordless drill/screwdriver

so as to avoid faults and/or risks to persons.

14. A damaged battery block or one that can no longer be charged must be disposed of as

special waste. Do not discard it with household waste.

15. Never throw the battery block onto a fire or into water. This will risk explosion!

Electrical safety

Always check whether your battery voltage matches that shown on the rating

plate. Also find out whether your mains voltage matches the input voltage of the

charger.

The battery charger is doubly insulated in compliance with EN60335; it therefore

does not require earthing.

When replacing old cables or plugs

Throw away old cables or plugs immediately as soon as new ones have replaced these. It is

dangerous to put the plug of a loose cable into the socket outlet.

Always remove the battery before starting work.

Fitting and removing drill cutters

Fig. B

In addition to drill cutters, the tool can also accommodate screwdriver bits with a hexagonal

shaft.

• Loosen the drill chuck (4) by rotating the hand-grip (9).

• Insert the shaft of the drill cutter into the chuck.

• Tighten the drill chuck so that the drill cutter is firmly clamped.

• Rotate the drill chuck in the opposite direction when you wish to change the cutter.

Connecting and removing the battery

Fig. C

Ensure that the exterior of the battery block or tool is clean and dry before

connecting the charger.

• Ensure that the direction reversing switch (6 Fig. A) is in the central position in order to

prevent the appliance from being switched on unexpectedly.

3. MOUNTING ACCESSORIES

90 Ferm

garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan bestilles.

Miljø

For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så

vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.

Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på

en genbrugsplads.

Garanti

Se venligst garantibetingelserne på garantikortet, som er vedlagt separat.

Vi erklærer herved, udelukkende på eget ansvar, at dette produkt opfylder følgende

standarder eller standardiserede dokumenter

EN60745-1, EN60745-2-1 , EN60745-2-2, EN55014-1, EN55014-2

EN60335-1, EN60335-2-29 , EN61000-3-2, EN61000-3-3

i henhold til følgende direktiver:

98/37/EØF, 73/23/EØF, 89/336/EØF

01-05-2006

ZWOLLE NL

J.A. Bakker - van Ingen J. Lodewijk

CEO Ferm BV Quality Manager Ferm Global

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

(

KONFORMITETSERKLÆRING (DK)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1066 FDC-1200K2 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1066 FDC-1200K2 Manual

Product: