Manual Ferm CDM1040 - FDC 2400I (page 11 of 50) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632683

Zoom out

Zoom in

1/50

Ferm 11

Faults

Should a fault occur, e.g. after wear of a part, please contact the service address on the

warranty card. In the back of this manual you find an exploded view showing the parts that can

be ordered.

Environment

To prevent damage during transport, the appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore please make use of options for recycling the

packaging.

NiCd cells are recyclable.

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Warranty

The guarantee conditions can be found on the separately enclosed guarantee card.

CE DECLARATION OF CONFORMITY (UK)

We declare under our sole responsibility that this product is in conformity

with the following standards or standardized documents:

EN50260-1, EN50260-2-1, EN50260-2-2, EN55014-1, EN55014-2,

EN60335-1, EN60335-2-29, EN61000-3-2, EN61000-3-3.

in accordance with the regulations:

98/37/EEC, 73/23/EEC, 89/336/EEC

from 01-12-2005

ZWOLLE NL

W. Kamphof

Quality department

It is our policy to continuously improve our products and we therefore reserve the right to

change the product specification without prior notice.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands

Ferm

ACCUSLAGBOREMASKINE

Numrene i den nedenstående tekst henviser til illustrationerne på side 2 - 3.

For din egen og andres sikkerhed anbefaler vi at du læser denne brugsanvisning

nøje igennem, før maskinen tages i brug. Opbevar denne brugsanvisning og den

øvrige dokumentation ved maskinen.

Indhold

1. Maskindata

2. Sikkerhedsinstruktioner

3. Montering af tilbehør

4. Funktion

5. Service & vedligeholdelse

1. MASKINDATA

Tekniske specifikationer

Pakkens indhold

1 Accu boremaskine

1 Batterie

1 Batterilader

2 Tilbehør

1 Kuffert

1 Brugsanvisning

1 Garantibevis

1 Sikkerhedsinstruktioner

Kontroller maskinen og tilbehør for transportskader.

Spænding | 24 V

—

---

Spænding akkulader | 230 V~

Frekvens akkulader | 50 Hz

Kapacitet akkumulator. | 1.5 Ah (NiCd)

Opladningstid | 100 min

Antal omdrejninger, ubelastet | 0-500/min / 0-1400/min

Antal slag, ubelastet | 0-8000/min / 0-22400/min

Max. borediameter (træ) | 30mm

Max. borediameter (beton) | 15mm

Max. borediameter (stål) | 13mm

Vægt (incl. 1 Akkumulator) | 2.5 kg

Lpa (lydtryk) | 87.7 dB(A)

Lwa (lydeffekt) | 100.7 dB(A)

Vibrationsværdi | 18.0 m/s

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1040 - FDC 2400I in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1040 - FDC 2400I Manual

Product: