538655
5
Zoom out
Zoom in
Previous page
1/30
Next page
Do not dispose of in household
waste.
Importantsafetynotesonchargerand
batteryblok
If you come into contact with acid
from the battery block, rinse it off
with water immediately. If acid gets
into your eyes, rinse out your eyes at
once with water and contact a doctor
immediately!
1. Read and note the operating instructions
and safety notes for the charger and
battery block before use!
2. NB! Only use the charger and battery block
that were supplied by the manufacturer -
otherwise you will risk an accident.
3. Protect the charger, battery block and
power tool from moisture, e.g. rain or snow.
4. Always check that all cables are connected
correctly before using the charger.
5. If you discover that a cable is damaged,
you should not use the charger again.
Have the damaged cable replaced
immediately.
6. When the charger is not in use, the mains
plug should be removed from the power
socket. Do not pull out the plug by grasping
the cable.
7. If the charger has been dropped or has
otherwise been exposed to high
mechanical stresses, you should have it
checked for damage by an authorised
dealer before using it again. Damaged
parts should be repaired.
8. Exercise caution when handling the battery
block and do not drop it or expose it to
impacts.
9. Never attempt to repair the charger or
battery block yourself. Repairs must
always be carried out by an authorised
dealer - otherwise you risk an accident.
10. Before cleaning or servicing the charger or
battery block, always pull the plug from the
charger socket.
11. Never charge the battery block when the
ambient temperature is below 5 °C or
above 40°C.
12. The air vents in the charger must never be
blocked.
13. The battery block must not be short-
circuited.
A short-circuit will cause a high
current to flow. This may result in
overheating, the danger of fire or
explosion of the battery block. This
may damage the battery block or the
user may risk an accident.
Therefore:
• Donotconnectanycablestothepoles
of the battery block.
• Takecarethattherearenometal
objects (nails, paper clips, coins, etc.)
on the contact surface of the battery
block.
• Donotexposethebatteryblockto
water or rain.
• Onlyusethebatteryblocksuppliedin
combination with this cordless drill/
screwdriver so as to avoid faults and/or
risks to persons.
14. A damaged battery block or one that can
no longer be charged must be disposed of
as special waste. Do not discard it with
household waste.
15. Never throw the battery block onto a fire or
into water. This will risk explosion!
Electricalsafety
When using electric machines always observe
the safety regulations applicable in your
country to reduce the risk of fire, electric shock
and personal injury. Read the following safety
instructions and also the enclosed safety
instructions.
Always check that the voltage on the
batterypack corresponds to the
voltage on the rating plate. Also
check that your mains voltage
corresponds to the input voltage of
the battery charger.
Class ll machine. Your machine is
double insulated; therefore no
earthwire is required.
GR
56
Ferm Ferm
05
GB
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CDM1003 FDC-1200K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1003 FDC-1200K in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info