Manual Ferm BJM1005 - FBJ-900P (page 12 of 54) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763372

Zoom out

Zoom in

1/54

Ferm 97

Kontroller maskinen, løsdele og tilbehør for transportskade.

Komponenter

Fig. A

skyggefugefræser er velegnet til at fræse skyggefuger til dyvelsamlinger i massivt træ,

krydsfiner, spånplader, fiberplader, plexiglas og kunstigt marmor.

1. Tænd-sluk-knap

2. Hjælpehåndtag

3. Spindellås

4. Vinkelstop

6. Skala til vinkelanslag

7. Knap til justering af fræsedybde

8. Spændearm til vinkeljustering

9. Spændearm til højdejustering

10. Knap til højdejustering

11 Skala til højdejustering

12. Bundplade

13. Tilslutning til støvpose

14. Støvpose

15. Motorhus

16. Pil (rotationsretning)

2. SIKKERHEDSFORSKRIFTER

I denne brugsanvisning anvendes de følgende piktogrammer:

Læs instruktionerne omhyggeligt

I overensstemmelse med grundlæggende sikkerhedsstandarder i de europæiske

direktiver.

Klasse II maskine – Dobbelt isolering – Du behøver ingen jordforbindelsestik.

Betegnelse for risiko for personskader, dødsfald eller beskadigelse af værktøjet i

tilfælde af at du er uopmærksom på instruktioner i denne manual.

Indikerer farer for elektrisk stød

Tag straks stikket ud af stikkontakten, hvis ledningen beskadiges og i forbindelse

med vedligeholdelse

Ferm

Joining the workpieces

When the grooves in both workpieces have been made the workpieces can be joined together.

• Put glue in both grooves.

• Place the biscuit dowel in the groove of one workpiece.

• Place the other workpiece on the biscuit dowel.

• Fasten the workpieces and wait till the glue is dry.

User tip for connecting two workpieces

Fig. K

• Saw a groove as big as one biscuit into the first workpiece

• Place the biscuit with good glue (according the material) into the groove

• Saw a longer groove into the other workpiece

• Now both workpieces can be positioned easily towards each other (clearance to correct)

• Fasten the workpieces and wait till the glue is dry

Checking the cutting depth

Fig. J

Always check the cutting depth after mounting a saw blade.

• Disconnect the plug from the socket.

• Move the motor base (15) as far as possible backwards.

• Set the cutting depth in the maximum position by turning the depth adjustment knob (7).

• Move the motor base forwards till the pin (A) will fall in the notch of the adjustment knob (7).

Turn the saw blade till one tooth of the saw blade is in the front position.

• Measure the distance from the side of the base plate to the tooth of the saw blade

• Check if the distance is 18 mm. the maximum position is 18 mm.

Setting the cutting depth

When the cutting depth is not correct, it can be adjusted as following.

• Move the motor base (15) as far as possible backwards.

• Loosen the pin (A).

• Set the cutting depth by turning the screw, the screw is positioned at the back of the pin (A).

• Repeat the procedure till the cutting depth is correct

• Fasten the pin (A).

6. MAINTENANCE

Make sure that the machine is not live when carrying out maintenance work on the

motor.

The Ferm machines have been designed to operate over along period of time with a minimum

of maintenance. Continuous satisfactory operation depends upon proper machine care and

regular cleaning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BJM1005 - FBJ-900P in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BJM1005 - FBJ-900P Manual

Product: