762289
6
Zoom out
Zoom in
Previous page
1/88
Next page
6
EN
2. MACHINE INFORMATION
Intended use
This machine combines all the advantages of a
horizontal and a vertical belt sander with those of
a disc sander. Its sturdy construction in cast iron
and steel makes the machine suitable for every
sanding job.
Technical specifications
Voltage 230-240 V, 50 Hz
Power input 350W
S2= 30 min*
No load speed sander belt 292m/min
No load speed sander disc 1450 /min
Sanding belt size 915 X 100 mm
Sanding disc size Ø 150 mm
Weight 12.2 kg
Lpa (Sound pressure level) 77+3 dB(A)
Lwa (Sound power level) 90+3 dB(A)
*S2= Maximum period of operation with a
capacity of 350 W
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Description
The numbers in the text refer to the diagrams on
pages 2-5.
1. Machine frame
2. Motor
3. Roller stop and parallel stop
4. Clamping handle
5. Transport roller
6. Sanding belt
7 On/off switch
8. Fence
9. Drive roller
10. Aluminium disc
11. Sanding disc
12. Working table
13. Mitre scale
14. Supporting arm
15. Connection vacuum cleaner
3.ASSEMBLY
Installation
Avoid the use of long extension cables. Do not
forget to leave enough space around the machine
for the workpieces to be sanded.
Assembly
Put the machine frame on its head and press
the four rubber stops into the foot of the frame.
Machine frame, aluminium disc (10) and work
plate (12) are supplied in separate packaging.
Push the aluminium disc on the shaft and
fasten the disc with the socket bolt in the side
of the disc (Fig.B - D).
Place the work plate (12) with the shaft in the
machine frame and secure the work plate
with the bolt in the side of the machine frame.
Check with a 90° sash angle on the work plate
and against the sanding disc if the angle is
exactly 90° (Fig.E).
If necessary, adjust this angle with the
calibration indicator.
The mitre scale (13), which is also supplied
separately, can be placed on the work plate
(12). With the use of this mitre scale the angle
of grinding can be determined precisely.
The fence (8) for the belt sander can be placed
behind the uppermost bolt of the V-belt guard.
In this way the workpiece can be held firmly
against the belt, without great hazards.
Attach the vacuum cleaner to the vacuum
cleaner connections (15)
To prevent the workpiece or your fingers
from getting caught between the work
plate (12) and the sanding disc (11), the
space between work plate (12) and
sanding disc (11) must not exceed 1.6 mm.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BGM1022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BGM1022 in the language / languages: All languages as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info