Manual Ferm BGM1005 - FSMW150 (page 6 of 42) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

632948

Zoom out

Zoom in

1/42

Ferm 79

KONFORMITETSERKLÆRING (DK)

Vi erklærer herved, udelukkende på eget ansvar, at dette produkt opfylder følgende standarder

eller standardiserede dokumenter:

EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN61029-1, EN61029-2-4

i overenstemmelse med direktivreglerne

98/37/EEC, 73/23/EEC, 89/336/EEC

Fra 01-10-2005

ZWOLLE NL

W. Kamphof

Quality department

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

Ferm

Using extension cables

Only use an approved extension cable suitable for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable reel always unwind the reel completely.

3. INSTALLATION

The grinder must be firmly bolted to a workbench. The length of the fixing bolts will depend on

the thickness of the workbench. If the workbench is made of steel, it is advisable to use a

wooden block or plank between the grinder and the bench, to insulate it and prevent vibration.

Mounting and adjustment of eye shield bracket and eye shield

Fig. B

The eye shield bracket and eye shield should only ever be assembled/adjusted

with the grinding wheel stationary, and the machine disconnected from the power

supply.

• Mount the holder of the cover glass together with the cover glass itself, by means of the

screw (A).

• Adjust the height of the holder of the cover glass by loosening a bit screw . The free space

between the stone and the holder of the cover glass will amount to 1 - 1,5 mm.

• Fasten well screw (A).

• Adjust the cover glass (see the figure above) in such a way that your face will be protected,

at the utmost.

• Use always safety glasses.

Adjusting tool rest

The tool rest should only be adjusted when the grinding wheel is completely statio-

nary, and the machine is disconnected from the power supply (the wall socket).

Secure the tool rest, allowing a maximum clearance (C) between the tool rest and the grinding

stone of 1 -1.5 mm.

Replacing the grinding stone

Fig. C

Required tools:

• 19 mm Spanner

• 8 mm Spanner

• Screwdriver

Only ever replace the grinding wheel when the motor is at a standstill and the power

is completely disconnected.

• Remove the guards, using the above tools. When replacing the stones, remember the

right-hand spindle is fitted with right-hand thread, the left-hand spindle with left-hand

thread.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BGM1005 - FSMW150 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BGM1005 - FSMW150 Manual

Product: