510132

Ferm BGM1003 Manual

8
Zoom out
Zoom in
Previous page
1/80
Next page
EN
8
NB: To prevent splintering, wood always needs
to be sanded in the longitudinal direction of the
grain.
To treat a very soft surface, there is a very handy
method to ‘bring the particles to the surface’.
This is done as follows: wet the already sanded
surface with a cloth or sponge and let it dry well.
Some wood fibres will swell up more than others,
which leads to a rougher surface than before.
Now the higher particles are treated with fine
sanding paper, the result is a remarkably smooth
surface. This method should not be applied with
varnished wood, however, because the varnish
may come loose because of the moisture.
5. Maintenance
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
The Ferm machines have been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory
operation depends upon proper machine care and
regular cleaning.
Malfunction
Below we have listed a number of possible
causes and corresponding solutions in case the
machine does not function as it should:
The electromotor gets hot
• The cool ventilation slots in the motor are
stopped up with dirt.
• Clean the cool ventilation slots.
• The motor is defective.
• Have your sanding machine repaired /
checked at your local Ferm dealer.
The connected machine does not work.
• Interruption in the mains connection.
• Check mains connection for fracture.
Have your sanding machine repaired /
checked at your local Ferm dealer.
Periodic maintance of the belt sander will
prevent unnecessary problems!
Cleaning
Never use water or other agressive liquids
to clean the machine. Clean the machine by
brushing it with a brush. Keep the ventilation slots
of the machine clean to prevent overheating of the
motor.
Lubrication
There is no need to lubricate the transport rollers
of the machine.
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card. In the back of this manual you find
an exploded view showing the parts that can be
ordered.
Environment
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Warranty
For the warranty conditions read the warranty
card at the back of these instructions for use.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BGM1003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BGM1003 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info