763847
5
Zoom out
Zoom in
Previous page
1/60
Next page
EN
5
Wear ear and eye protection

• Avoid too high pressure
• Keep bystanders and pets away
• Children and animals should be kept far away
from the area of operation of the machine.
• If the compressor is no longer in use, always
take the plug out of the plug socket.
• Always make sure that compressed-air hoses
are used for compressed air and which are
characterized by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.

• Preferably wear safety glasses.
• Do not use the tool in a work area where
stairs, ladders or scaffolding are involved.
• Use accessories with adequate speed rating.
• Never aim the air flow at people or animals.
• Be cautious when using compressed air.
• Only use clean and dry compressed air as a
power source for the tool. Never use oxygen
or a combustible gas.
• Do not exceed maximum operating pressure.
• Keep the tool clean. Do not use any
aggressive or alcohol-based cleaner.
• Never use gasoline or other flammable liquids
to clean the tool. Vapours in the tool will ignite
by a spark and cause the tool to explode.
• Disconnect the tool from the air supply before
troubleshooting or servicing, or during non-
operation.
• Only carry the tool at the grip and never with
the trigger actuated.
• Never carry the tool by the air hose or pull the
air hose to move the tool.


Fig. B
• Wrap a piece of sealing tape around the
connecting piece (7) of the air hose.
• Fit the connecting piece of the air hose into
the connection (3).
• Check whether the air hose is connected
properly.

Fig. C & D
• Fit a socket onto the accessory holder (4).
• Firmly press the socket onto the accessory
holder.

Fig. E & F
• Turn the adjusting knob (2) counterclockwise
to increase the impact force.
• Turn the adjusting knob clockwise to reduce
the impact force.
1 - 190 Nm
2 - 220 Nm
3 - 260 Nm
4 - 310 Nm

Fig. A
• Push the forward/reverse switch (6) forward
for clockwise rotation.
• Push the forward/reverse switch backward for
counterclockwise rotation.
• Tighten the screw.


• Check whether the trigger can move freely.
• Make sure that the tool is lubricated before
connecting it to compressed air.
• Check if the air hose is correctly fitted.
• Set the air pressure to a value within the
allowable operating pressure.
• Only keep your finger on the trigger at the
moment of starting the tool.

• To switch on the tool, press the trigger switch (1).
• To switch off the tool, release the trigger
switch.

Fig. A, C & D
• Fit a required socket.
• Select the direction of rotation.
• Place the tool on the fastener.
• Switch on the tool.
• If necessary, adjust the impact force.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm ATM1043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ATM1043 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info