585908

Ferm ATM1039 Manual

2
Zoom out
Zoom in
Previous page
1/16
Next page
EN
2 Ferm
PAINT SPRAY GUN
Read the safety and operating
instructions of the air tool and the
compressor before using the appliance.
Contents
1. Machine data
2. Safety instructions
3. Use
4. Maintenance
1. Machine data
Technical specifications
Operating pressure 4.5 - 6 bar
Nozzle diameter 1.5 mm
Maximum nozzle flow rate 6.5 cfm
Container capacity 400 cc
Weight 0.50 kg
2. Safety instructions
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
Wear protective gloves
Use a spray-mask during spraying
Wear eye protection
Safety instructions
• Avoidtoohighpressure
• Neverbloworsprayindirectionofyourselfor
others; this could cause serious injury.
• Keepbystandersandpetsaway
• Childrenandanimalsshouldbekeptfaraway
from the area of operation of the machine.
• Ifyouusethecompressortospraypaint:
a) Do not work in enclosed spaces or near
naked flames.
b) Make sure that the environment in which
you will be working has dedicated
ventilation.
c) Protect your nose and mouth with a
dedicated mask
• Ifthecompressorisnolongerinuse,always
take the plug out of the plug socket.
• Alwaysmakesurethatcompressed-airhoses
are used for compressed air and which are
characterised by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.
3. Use
Only use the compressor with accessory in a good
ventilated area.
• ConnectthePUhosebetweencompressor
and accessory
• Slidethehose-couplerontheaccessoryuntil
the coupler clicks. Now the hose is connected
correctly.
• Toreleasethecoupler,pulltheoutsidering
backwards.
Use paint spray gun
Paintandsolventsareveryflammable.Therefore
check the following:
• Onlysprayingoodventilatedareas
• Useaspray-maskduringspraying
• Avoidopenfireandsmokingduringspraying
• Donotsprayinanareawithaburningstove
• Neverspraywithfuelofotherflammable
products
• Wearsafetygoggles
Toobtainthebestresults,itisimportantthatyou
prepare the surface to be sprayed and thin the
painttothecorrectviscosity,beforeyouoperate
yourspraygun.Alwaysensurethatthesurfacesto
besprayedarefreefromdust,dirtandgrease.
Make sure that you have masked the areas that
shouldnotbesprayed,usingagoodquality
maskingtape.Thepaintorfluidtobesprayed
should be thoroughly mixed and free from lumps
or other particles. Many substances can be
sprayedwithyourspraygun,butalwayscheckthe
manufacturers recommendations before
purchasing your paint.
Toobtainthebestresults,keepyourspraygun
level and parallel to the surface at all times.
Keepthenozzle25-30cmfromthesurfaceand
spray evenly from side to side or up and down. Do
not spray at an angle as this will lead to paint runs
on the surface. Use smooth and even strokes.
It is essential that the spray gun is cleaned
thoroughly after every use. Failure to clean it will
almost certainly result in blockages and it may not
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm ATM1039 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ATM1039 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info