Manual Ferm AGM1102 (page 8 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish)

764188

Zoom out

Zoom in

1/80

Mounting and removing the auxiliary grip

(fig.C)

Mounting

• Tighten the auxiliary grip (6) into one of the

mounting holes (13).

Removing

• Loosen the auxiliary grip (6) from the mounting

hole (13).

USE

Switching on and off (fig. A)

• To switch on the machine in continuous mode,

slide the on/off switch (1) in the direction of the

grinding disc.

• To switch off the machine, press the lower part

of the on/off switch (1).

Hints for optimum use

• Clamp the workpiece. Use a clamping device

for small workpieces.

• Draw a line to define the direction in which to

guide the grinding disc.

• Hold the machine with both hands.

• Switch on the machine.

• Wait until the machine has reached full speed.

• Place the grinding disc on the workpiece.

• Slowly move the machine along the pre-drawn

line, firmly pressing the grinding disc against

the workpiece.

• Do not apply too much pressure on the

machine. Let the machine do the work.

• Switch off the machine and wait for the

machine to come to a complete standstill

before putting the machine down.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

• Regularly clean the housing with a soft cloth.

• Keep the ventilation slots free from dust and

dirt. If necessary, use a soft, moist cloth to

remove dust and dirt from the ventilation slots.

Only use sharp and undamaged grinding

discs.

Carbon brushes

If the carbon brushes are worn, the carbon

brushes must be replaced by the customer

service department of the manufacturer or a

similarly qualified person.

WARRANTY

Consult the enclosed warranty terms.

ENVIRONMENT

Disposal

The product, the accessories, and the

packaging must be sorted for

environmentally friendly recycling.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EU for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1102 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 10,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm AGM1102 Manual

Product: