510099
7
Zoom out
Zoom in
Previous page
1/108
Next page
7
EN

Ifthemoulded3-pinplugattachedtotheunitis
damaged and needs replacing, it is important that
it is correctly destroyed and replaced by an
approvedBS1363/5Afusedplugandthatthe
following wiring instructions are followed.
The wires in the mains cable are coloured in
accordance with the following code:
blue neutral
brown live
As the colours of the wires in the mains cable of
the unit may not correspond to the coloured
markings identifying the terminals in the plug,
proceed as follows:
- The wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black.
- The wire which is coloured brown must be
connected to the terminal which is marked with
theletterLorcolouredred.
TECHNICAL DATA
AGM1042
Mainsvoltage V~ 230
Mainsfrequency Hz 50
Power input W 750
No-load speed min
-1
11,000
Grinding disc
Diameter mm 115
Bore mm 22.2
Spindlethread M14
Weight kg 2.2
NOISE AND VIBRATION
AGM1042
Soundpressure(L
pa
) dB(A) 87.7
Acousticpower(L
wa
) dB(A) 98.7
Uncertainty(K) dB(A) 3
Vibration m/s
2
7.52
Uncertainty(K) m/s
2
1.5
2
Wear hearing protection.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardisedtestgiveninEN60745;itmaybeused
to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
maysignicantlyincreasetheexposurelevel
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signicantlyreducetheexposurelevel
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
yourhandswarm,andorganizingyourwork
patterns
M

Your angle grinder has been designed for grinding
and cutting masonry and steel.
1. On/offswitch
2. On/offswitchlock
3. Spindlelockbutton
4. Spindle
5. Guard
6. Maingrip
7. Auxiliary grip
8. Carbon brush indicator
ASSEMBLY
4
Before assembly, always switch off the
machine and remove the mains plug
from the mains.
Mounting and removing the grinding disc

2
Never attempt to remove the guard.
Mounting
● Placethemachineonatablewiththeguard
(5) facing upwards.
● Mountthespacer(9)ontothespindle(4).
● Mountthegrindingdisc(10)ontothespindle(4).
● Keepthespindlelockbutton(3)pressedand
rmlytightenthetensionnut(11)usingthe
spanner (12).
Removing
● Placethemachineonatablewiththeguard
(5) facing upwards.
● Keepthespindlelockbutton(3)pressedand
loosen the tension nut (11) using the spanner
(12).
● Removethegrindingdisc(10)fromthespindle
(4).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1042 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1042 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info