14 Ferm
Spare parts list / Ersatzteilliste FEAG-115/500D
Ferm No. Description Ref. No.
406962 Flange set 1,3
406963 Guard 4 till 6
406964 Auxiliary handle 20
406965 Switch complete 32, 35, 41
406966 Carbon brush (set) 39
406967 Flange key 49
Ferm No. Umschreibung Ref. No.
406962 Flanschsatz 1,3
406963 Schutzhaube 4 bis 6
406964 Zusatzhandgriff 20
406965 Schalter (Komplett) 32, 35, 41
406966 Kohlebürsten (Satz) 39
406967 Flanschschüssel 49
ANGLE GRINDER 115 mm
The numbers in the following text refer to the
drawing on page 2.
Carefully read this manual before using the
machine. Make sure that you know how the
machine functions and how to operate it. Maintain
the machine in accordance with the instructions to
make sure it functions properly. Keep this manual
and the enclosed documentation with the
machine.
Introduction
This machine is developed for grinding and roughing of
metal and stone. With help of the correct accessories
the machine can also be used for brushing and sanding.
Contents
1. Machine data
2. Safety instructions
3. Mounting accessories
4. Use
5. Service & maintenance
1. MACHINE DATA
Technical specifications
Product information
Fig.A
1. On/off switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
Contents of packing
The package contains:
1Angle grinder
1Side handle
1 Spanner
1 Disc
1Set carbon brushes
1Instruction manual
1Warranty card
Check the machine, loose parts and accessories for
transport damage.
2. SAFETY INSTRUCTIONS
The following symbols are used throughout this manual:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don’t
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Keep bystanders away
Risk of fire
Wear ear and eye protection
Wear protective gloves
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
Safety instructions
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety
instructions. Keep these instructions in a safe place!
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools in presence of
flammable liquids or gases.
3. Guard against electric shock.
Prevent body contact with grounded surfaces (e.g.
pipes, radiators, refrigerators).
Voltage | 230 V
Frequency | 50 Hz
Power input | 500 W
No-load speed | 11000/min
Disc diameter | 115 mm
Spindle dimension | M14
Weight | 2.1 kg
Lpa (sound pressure) | 87.4 dB(A)
Lwa (acoustic power) | 100.4 dB(A)
Vibration value | < 2.5 m/s2
Ferm 3
