729758

Fenton X20 - 103.085 Manual

2
Zoom out
Zoom in
Previous page
1/12
Next page
2
ENGLISH
Congratulations to the purchase of this Fenton product. Read the manual prior to using the unit. Follow the instructions in order
not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a
qualified technician in order to avoid electrical shock. Keep the manual for future reference.
- Keep the original packaging in case of defects. Return
the product in its original packaging.
- Consult a professional before installing this product.
- This product contains high-voltage parts; NEVER open
the housing!
- Never pull the power cord while disconnecting it from
the mains socket. Remove the power cord by pulling
the connector.
- Never connect or disconnect the power cord with wet
hands.
- If the connector or the power cord is damaged; they
need to be replaced (or repaired) by a qualified
serviceman.
- If the housing is damaged in such away so you can see
internal parts, you may never connect the power cord
with the mains socket and you may never switch the
product on. Please contact your dealer if this situation
occurs.
- This product may only be repaired by qualified servicing
personnel.
- Only connect this product with a 230VAC / 50Hz
earthed power supply.
- Don’t install this product near heat sources like
radiators etc. Don’t install on vibrating surfaces.
- Always disconnect this product during thunderstorms.
Also disconnect this product when not in use for a long
period of time.
- Water vapour might occur at first use after a long period
of not using this product. Please let the product reach
room temperature before using it.
- Never use this product outdoors or in a wet
environment.
- To prevent accidents in professional environments;
please heed instructions and guidelines at all times.
- Keep this product out of reach of children.
- Don’t use cleaning spray to clean this product.
Remainders of cleaning sprays are responsible for the
build-up of dust and grease. Please contact a servicing
company when this product is malfunctioning.
- Please clean your hands before using this product.
- Don’t use excessive force while controlling this product.
- Place this product on a stable and a evened surface.
- NEVER look directly in the projection lens.
- Only power this product off when the fan stops blowing;
the lamp may blow during abrupt shutdowns – this may
cause fire or electric shock.
- NEVER touch the grille or bottom part of the housing
because of heated airflows.
- Clean the air filter at least once a month and NEVER
look directly into the air filter during operation.
- Never clean this product with chemical solutions. This
might damage the paint. Use a dry cloth instead.
- Install out of the way of electronic devices that might
cause humming malfunctions with this product.
- Only use identical servicing parts when servicing this
product. Irreparable damages or radiation might occur.
- Turn this product of before disconnecting it from the
mains power supply. Remove the power chord and
other connection cables before (re)moving this product.
- Don’t damage the power chord by stepping on it.
NEVER install this product across walking routes.
- This product requires a 230VAC / 50Hz power supply.
Please inform if you’re mains supply meets these
specifications. When you use this product abroad,
please inform if the mains supply meets the above
requirements.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fenton X20 - 103.085 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fenton X20 - 103.085 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info