3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
PRODUCT DESCRIPTION
1. Power ON/OFF
2. Microphone volume
3. M-Tone
4. Microphone echo adjustment
5. Bass adjustment
6. Treble adjustment
7. Balance adjustment
8. USB input display
9. USB input
10. Microphone input 1 (6.3mm 1/4“
jack)
11. Aux input (3.5mm jack)
12. Microphone input 2 (6.3mm 1/4“
jack)
13. DVD input button
14. MP3 input button
15. Input selection (FM/BT/AUX)
16. Play/Pause
17. Previous
18. Next
19. Volume adjustment
20. FM Antenna
21. DVD Input (RCA)
22. Record Output (RCA)
23. Speaker Output Right/Left
24. Power lead
BT CONNECTION
1. Activate the BT on your device (Mobile phone, tablet etc.) which you want to play the music. See
the operating instructions for that device.
2. Press the “INPUT” button and activate BT on amplifier.
3. Select “FENTON” on your BT device and pair.
Attention: BT distance is approx. 10meter without any barrier.