625942
23
Zoom out
Zoom in
Previous page
1/118
Next page
03-7
3.3 Locking brake facilities
The components of the brake facilities, particu-
larly the overrunning equipment, wheel brakes
and towbar were checked in accordance with
the appropriate EU Guidelines and may only be
used in a licensed combination.
If you alter or modify any components of the
brake facilities, the operation permission loses
its validity. Modications may only be made with
the manufacturer's permission.
Noises while driving
Generally, the friction pads of the AKS 2004/AKS
3004 do not make noises! Any clicking, creaking
and screeching noises could be caused by the
following:
foreign matter or dirt between the friction pad
and the drawbar ball
dry operation of the drawbar/tie rod in the
bushings of the overrun coupling
drawbar ball on the base vehicle can be re-
moved and there is too much tolerance in the
lock mechanism
surface coating has not been removed from
drawbar ball (grease, galvanised, Dacomet,
varnish, KTL or any other coating)
To eliminate
Clean the drawbar ball and the friction pads
by lighting sanding the pads with sandpaper
(grain: 100-120).
Use the lubricating nipple to grease the bu-
shings. In addition, pull the gangway bellows
on the overrun coupling off towards the front
and grease all of the exposed drawbar (Fig.
25).
Lubricant: multi-purpose grease in accor-
dance with DIN 51 825.
Take the camper to an authorised specialist
company. Have the contact surfaces checked
for damages and the lock mechanism che-
cked that it is functioning correctly. If neces-
sary, replace the drawbar ball or, if permitted,
regrease the lock mechanism (please refer
also to the operating manual for the remova-
ble drawbar ball).
1
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fendt Platin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fendt Platin in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fendt Platin

Fendt Platin User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info