625942
20
Zoom out
Zoom in
Previous page
1/118
Next page
03-4
Maintenance and cleaning
Exchanging the friction pads
(lateral friction pads)
Arrow on the pressure disc (Fig. 15/Pos.
m
)
reaches or surpasses the exchange mark on
the case (Fig. 15/Pos.
l
).
Unhitch AKS 2004/AKS 3004.
Use a screwdriver to remove the protective
caps (Fig. 16/Pos.
j
).
Press used friction pads (Fig. 16/Pos.
k
)
inwards and remove (use a hammer and
punch).
Insert new friction pads from below, placing
the bolt in the bush (Fig. 16/Pos.
l
) and
press them all the way in. (Bolt will lock into
place; no tools required.) If adjusting washers
are provided (Fig. 16/Pos.
m
), assemble
them together with the new friction pads.
Checking the shells for friction pads
If you drive a lot of miles over a number of
years, the shells for the friction pads for AKS
2004/AKS 3004 will be subject to a certain
amount of mechanical wear. To enable the
user to check them regularly, a control display
showing wear has been integrated in the hand
grip (Fig. 17/Pos.
j
).
Hitch the AKS 2004/AKS 3004 to the base
vehicle (do not activate the stabilizing device).
If a green light is visible on the coupling grip
(Fig. 18/Pos.
k
), the AKS 2004/AKS 3004
is either new or the wear on the ball and the
AKS 2004/AKS 3004 is still within the permis-
sible limits.
If you can only see a red light (Fig. 19/Pos.
l
), this could be caused by one of the fol-
lowing:
- AKS 2004/AKS 3004 is not worn out, but
coupling ball is worn out to the limit (diame-
ter of 49 or less).
- AKS 2004/AKS 3004 and coupling ball are
The friction pads (Fig. 14/Pos.
j
,
k
,
l
) press against the coupling
ball to generate a damping torque
that prevents rocking.
Therefore, the friction pads are sub-
ject to wear. The friction pads have
a buffer, giving them a high wear
lifespan.
Bild./Fig. 14
Bild./Fig. 15
Bild./Fig. 16
Bild./Fig. 17
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fendt Platin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fendt Platin in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fendt Platin

Fendt Platin User Manual - Dutch - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info