6. Interior structure
38
Extending the bench seats into an additional bed
(Optional extra – model 515 SD only)
Widening the lengthwise bench seat (on the door side)
• Release the pushlock button on the side of the bench.
• Flip the side of the bench up and fold out the supporting board
until it locks into place.
• Insert the board with the supporting leg as shown in the picture on
the left. Arrange the additional cushions on it.
• To fold the supporting board and the side of the bench away,
press the lever of the locking mechanism and return the extension
to its original position.
Extending the bench seat as a footrest
(Optional extra – model 465 SFH only)
• Repeat the steps set out above, but without the board with the
supporting leg
Extending the bench aects the passage width of the
entrance door - and thus the emergency escape route.
Converting the centre round seating arrangement
(560 SKM)
The extra cushions (*) are only required when conver-
ting the seats into a bed; otherwise, they are stored.
Converting the centre seating arrangement into a
(495 SKM / 515 SKM / 550 KMG)
*
*
• Fold in the articulated support leg and place the tabletop on
the designated support bars between the benches.
• Place the cushions as shown in the photo on the left.
The extra cushions (*) are only required when conver-
ting the seats into a bed; otherwise, they are stored.
**
