443082
5
Zoom out
Zoom in
Previous page
1/16
Next page
1. LINE CORD - Connect the power line cord to a
g rounded AC receptacle in accordance with the
voltage and frequency ratings as listed on the rear
panel of the Prosonic amplifier.
2. POWER SWITCH - Turns the AC power on and off.
3. FUSE - Located in the AC supply of the amplifier, the
fuse helps protect the unit from electrical fault or tube
failure. Replace a failed fuse with the same type and
rating. If the amplifier repeatedly blows fuses, take it
to an authorized Fender service center.
4. S TANDBY SWITCH - Switches the unit between
operate and stand-by modes when the power switch is
ON. In stand-by mode, no sound will be heard from the
amplifier but power is still supplied to the tube
filaments keeping them warm and the unit ready to
play. Use this switch during short breaks to increase
tube life. Wait at least 50 seconds after the power
switch is on before putting the unit into the standby
mode.
5. RECTIFIER/BIAS SWITCH - Allows for the selection of
rectifier sounds and bias classes to best suit your
playing style (experiment to find a preferred setting).
The (1) TUBE A setting at low volume sounds much like
the (2) TUBE AB
2
and (3) S.S. “solid state” AB
2
settings at high volume.
6. IMPEDANCE SWITCH (Head only) - Sets the output
impedance of the amplifier to match the speaker
impedance for maximum power and tube life.
7. SPEAKER (Combo), SPEAKER 1 (Head) - Primary
output jack for connection to speakers. A speaker
must always be connected at this jack for the unit to be
heard.
8. EXTERNAL SPEAKER (Combo), SPEAKER 2 (Head) -
Output jack for connection to an external speaker.
ONLY use in conjunction with the main speaker jack.
Using this jack on the Combo automatically switches
the amplifier impedance to 8.
9. FOOTSWITCH - Jack for connection to the included
footswitch. The footswitch allows remote switching
between channels as well as ON/OFF switching of the
REVERB effect on the combo unit only.
10.EFFECTS RETURN - Connect cord from extern a l
effects devices at this input jack. Inserting a plug at
this jack automatically disconnects the unit’s internal
connection from the pre-amp to the power amp.
11.EFFECTS SEND - Connect cord to external effects
devices at this output jack. This jack can also be used
as a line out.
R
R
e
e
a
a
r
r
P
P
a
a
n
n
e
e
l
l
F
F
u
u
n
n
c
c
t
t
i
i
o
o
n
n
s
s
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
1 2 3 4 5 6 7 8 9 10 11
PART NUMBER* - COMBO: 021-1077-x00 (100V) 021-1007-x00 (120V) 021-1047-x00 (230V) UK
021-1067-x00 (230V) 021-1037-x00 (240V) Aust 021-1087-x00 (230V) Nordic
SPEAKER ENCLOSURE: 2-10” Custom Design Celestion
®
speakers
PART NUMBER* - HEAD: 021-2077-x00 (100V) 021-2007-x00 (120V) 021-2047-x00 (230V) UK
021-2067-x00 (230V) 021-2037-x00 (240V) AUSTRALIA/ NZ
POWER REQUIREMENTS: 360W.
COMPANION SPEAKER ENCLOSURE: 4 12” Celestion
®
Vintage 30 speakers:
021-3001-100 (RED) 021-3001-200 (GREEN) 021-3001-000 (BLACK)
POWER OUTPUT: Class AB2, Solid state rectifier: 60 W R.M.S. (minimum into 8 or 16 )
Class AB2, 5AR4/GZ34 rectifier: 50 W R.M.S. (minimum into 8 or 16 )
Class A, 5AR4/GZ34 rectifier: 30 W R.M.S. (minimum into 8 or 16 )
OUTPUTIMPEDANCE: 8 or 16 (Combo), 4, 8 or 16, (Head).
INPUTIMPEDANCE: 1 M
TUBES: COMBO HEAD
Two (2) Two (2) 5881/6L6WGC (P/N 099-5090)
Five (5) Four (4) 12AX7A (P/N 099-5091)
One (1) None (0) 12AT7 (P/N 099-5092)
One (1) One (1) 5AR4/GZ34 (P/N 099-5097)
FUSE TYPE: 100/120V units: T3 Amp/250V, 230-240V version T1.6 Amp 250V
DIMENSIONS: COMBO HEAD
HEIGHT: 18.5 in (47 cm) 9 in. (23 cm)
WIDTH: 24 in (61 cm) 24 in. (61 cm)
DEPTH: 10.5 in (26.5 cm) 9.5 in. (24 cm)
WEIGHT: 48 lbs. (22 kg) 42 lbs. (19 kg)
*For Prosonic COLOR DESIGNATED part number, replace “x” with: 1 = RED, 2 = GREEN, 0 = BLACK (Combo Only)
Product specifications are subject to change without notice.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Prosonic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Prosonic in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info