443088

Fender Princeton 65 Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
PRINCETON 65 FRONT PANEL FUNCTIONS
A. INPUT 1 - Plug your guitar in here.
B. INPUT 2 - A lower impedance and sensitivity
input than input 1, useful for guitars with active
pickups. When used with passive guitars, it
provides a darker tone. Both inputs are identical if
used simultaneously.
C. NORMAL VOLUME - Adjusts the overall
loudness of the NORMAL CHANNEL.
D. TREBLE - Adjusts the amount of increase or
decrease in the high frequency range.
E. BASS - Adjusts the amount of increase or
decrease in the low frequency range.
F. DRIVE - Adjusts the amount of preamp
amplification in the DRIVE CHANNEL. Cleaner sound is
achieved at lower gain settings; high gain settings
will produce more sustain and distortion. This
control works in conjunction with the DRIVE VOLUME
control (item H) to set the overall loudness of the
DRIVE CHANNEL.
G. DRIVE CHANNEL INDICATOR - When this
indicator is illuminated, the DRIVE CHANNEL is active.
H. DRIVE VOLUME - Adjusts the overall loudness of
the DRIVE CHANNEL.
I. CH SELECT - Activates the DRIVE CHANNEL.
J. TREBLE - Adjusts the amount of increase or
decrease in the high frequency range.
K. MID - Adjusts the overall tone quality without
affecting the signal level. High MID settings will
provide emphasis in the midrange frequencies
whereas a lower setting will notch the midrange.
L. BASS - Adjusts the amount of increase or
decrease in the low frequency range.
M. REVERB - Adjusts the amount of reverb present
in both the NORMAL and DRIVE CHANNELS.
N. FOOTSWITCH - Plug-in connection for the
optional remote footswitch to select between the
NORMAL and DRIVE channels. For proper
operation of the footswitch, the Gain Select switch
should be out. NOTE: Any good quality patch cord
will work with the remote footswitch, however, a
speaker grade cord is preferable to a coax guitar
cord.
O. PRE OUT - This jack provides an output signal
from the preamp. Reverb is also present at this
output. It may be used to drive effects units in an
effects loop, to drive additional amplifiers in a multi-
amp set up or as a preamp send to a mixing
console.
P. PWR IN - This jack provides a return from your
effects units. This jack can also be used as a power
amp input.
Q. PILOT JEWEL - Illuminates when the Princeton
65 is receiving power.
REAR PANEL
POWER SWITCH - This switch turns the AC power
ON and OFF. When the switch is OFF, the amplifier
is completely shut down.
LINE CORD - This amplifier is equipped with an IEC
grounding type supply cord to reduce the possibility
of shock hazard. Be sure to connect it to a
grounded receptacle. DO NOT ALTER THE AC
PLUG.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Princeton 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Princeton 65 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info