550708
9
Zoom out
Zoom in
Previous page
1/12
Next page
These LEDs are numbered 1, 2, 3 and correspond to the three
positions within each of the selection ranges A, B, C, D on
each knob. Use the LEDs to determine exactly which position
the knob is pointing to, for example, A 1 is shown below:
Effect Selections
The tables below list the effect selections for each knob.
MODULATION EFFECTS
A1 Chorus
A2 Chorus Deep
A3 Flanger
B1 Bias/Sine Tremolo
B2 Optical/Vintage Tremolo
B3 Optical/Vintage Tremolo Fast
C1 Vibratone Slow
C2 Vibratone Fast
C3 Octaver
D1 Phaser Slow Deep
D2 Phaser Medium
D3 Step Filter
DELAY EFFECTS REVERB EFFECTS
A1 Tape Delay 150ms / 1 Repeat
A2
Stereo Tape Delay 300ms / 3 Repeats
A3
Mono Delay 700ms / 4 Repeats
B1 Small Room Reverb
B2 Plate Reverb
B3 Large Hall Reverb
C1 Fender '65 Spring Reverb
C2 Fender '63 Spring Reverb
C3 Tape Delay Room
D1 Tape Delay Large Hall
D2 Ducking Delay Small Hall
D3 Echo Filter
You can completely change the effects list on your
Mustang amplifier using Fende FUSE software
available at www.fender.com/support.
Effects Level
You can adjust the effects level by holding down the EXIT
button while rotating either the MOD or DLY/REV knob,
depending on which effect type you want to adjust.
Tap Button
The TAP button can be used to "tap in" delay time and
modulation rate settings:
Delay time — TAP button blinks green:
Modulation rateTAP button blinks red:
When you select a delay effect, the TAP button will blink
green in time with the delay time setting. When you select a
modulation effect, the TAP button will blink red in time with
the modulation rate setting.
When both delay and modulation effects are selected
simultaneously, the TAP button will blink green and only
control the delay time setting.
You can use TAP to set both delay time and modulation
rate by tapping in the modulation rate first, with NO
delay effect selected, then adding a delay effect and
tapping in the delay time last.
To set the TAP interval of effects:
1. Select an effect that causes the TAP button to blink, using
the DLY/REV or MOD knob.
2. Press the TAP button rhythmically (twice minimum) in time
with the desired interval.
These LEDs are linked to the
knob that is being turned
9
MU STA NG
I / II
f e n d e r . c o m
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Mustang II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Mustang II in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fender Mustang II

Fender Mustang II User Manual - German - 6 pages

Fender Mustang II User Manual - French - 6 pages

Fender Mustang II User Manual - Spanish - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info