661304

Fender MUSTANG GT40 Manual

43
Zoom out
Zoom in
Previous page
1/55
Next page
The EXP-1 Expression Pedal is a dual-mode foot controller that enables the
user to control master volume (“Volume” mode) and various amp and eect
parameters (“Expression” mode).
Switch between Volume and Expression modes by stepping on the toe
switch (at the top of the pedal). Red and green LEDs indicate the mode in
use. Volume mode—indicated by the green LED—controls master volume
or can be turned o. Expression mode—indicated by the red LED—controls
many Mustang GT eect parameters such as wah eect frequencies, modu-
lation eect rates, etc.
To set up the EXP-1 for use, connect it to the footswitch jack on the back of the amplier, turn the amp on.
Press the MENU utility button on the amp and use the ENCODER to scroll to and select “EXP-1 SETUP” on the
menu shown (see illustration below).
A prompt will appear to select “PRESET SETTINGS” or “GLOBAL SETTINGS” (see illustration below); use the
ENCODER to select one. PRESET SETTINGS is used to assign the EXP-1 to a specic amp or eect within a
particular preset, in which a wide variety of parameters can be modied, depending on the amp or preset in
use. GLOBAL SETTINGS is used to congure parameters that will aect all presets. Both are described in more
detail below.
PRESET SETTINGS
As noted above, PRESET SETTINGS is used to assign the EXP-1 to a specic amp or eect within a particular
preset. To do this, press the ENCODER on PRESET SETTINGS, and the middle SIGNAL PATH LAYER will show—
one at a time—the amp and eects in that preset to which the EXP-1 can be assigned. The user can scroll
through these by turning the ENCODER (see illustration below).
EXP-1 EXPRESSION PEDAL
41
MENU
GLOBAL EQ
USER
EXP-1 SETUP
AMP SETTINGS
ABOUT THIS AMP
MENU
PRESET SETTINGS
GLOBAL SETTINGS
back
MENU
EXP-1 (PRESET)
VOL
VOL OFF GAIN
EXP PARAM HEEL TOE
’65
TWIN
back
In EXP-1 PRESET SETTINGS, the amp and eects in a preset to which the EXP-1 can be assigned are shown one by one in the SIGNAL
PATH LAYER; the ENCODER is used to scroll through them. In the example above, a ’65 Twin amp is highlighted.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender MUSTANG GT40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender MUSTANG GT40 in the language / languages: English as an attachment in your email.

The manual is 9,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info