661305

Fender MUSTANG GT100 Manual

39
Zoom out
Zoom in
Previous page
1/55
Next page
EFFECTS MODE
EFFECTS mode enables the user to bypass any of the rst three eects in a preset. To do this, step on the
MODE button until “EFFECTS” mode is activated, as indicated by the illuminated green MODE LED directly to
the left of the label “EFFECTS.” Within whichever preset is already set on the amp, the rst three eects in that
preset (if any) are assigned to FUNCTION buttons 1, 2 and 3 (also labeled on the footswitch as “FX 1,” “FX 2” and
“FX 3” for this purpose). When an eect is on, the corresponding red FUNCTION LED above the eect’s assigned
FUNCTION button will be illuminated. To bypass an eect, step on its corresponding FUNCTION button, at
which point its red FUNCTION LED will turn o (see illustration below).
37
1
FX 1
REC/DUB
PRESETS
EFFECTS
LOOPER
2
FX 2
PLAY/STOP
3
FX 3
UNDO
BANK DOWN
QA
MODE
HOLD
TUNER
BANK UP
MGT-4
ASSY. P/N 7710238000
1
FX 1
REC/DUB
PRESETS
EFFECTS
LOOPER
2
FX 2
PLAY/STOP
3
FX 3
UNDO
BANK DOWN
QA
MODE
HOLD
TUNER
BANK UP
MGT-4
ASSY. P/N 7710238000
Step on the footswitch MODE button (green arrow) to cycle through modes until red “PRESETS” MODE LED illuminates. A “bank” of three
presets containing whichever preset is already set on the amp is assigned to FUNCTION buttons 1, 2 and 3 (yellow arrows), each with its
own red FUNCTION LED to indicate use. The DISPLAY WINDOW also shows the preset in use (preset 1 in this illustration).
In PRESETS mode, move upward through succeeding banks of presets (“BANK UP”) by stepping on FUNCTION buttons 2 and
3 simultaneously (double arrow at right). To move downward through preceding banks of presets (“BANK DOWN”), step on
the MODE button and FUNCTION button 1 simultaneously (double arrow at left). Select the desired preset within its bank by
stepping on its corresponding FUNCTION button (preset/FUNCTION button 1 in this illustration).
1
FX 1
REC/DUB
PRESETS
EFFECTS
LOOPER
2
FX 2
PLAY/STOP
3
FX 3
UNDO
BANK DOWN
QA
MODE
HOLD
TUNER
BANK UP
MGT-4
ASSY. P/N 7710238000
Step on the footswitch MODE button (green arrow) to cycle through modes until green “EFFECTS” MODE LED illuminates. The
rst three eects in whichever preset is already set on the amp are assigned to FUNCTION buttons 1, 2 and 3 (yellow arrows);
each with its own red FUNCTION LED to indicate use. In the example shown above, the preset eect assigned to FUNCTION
button 1 (FX 1) is on, and can be bypassed by stepping on that button.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender MUSTANG GT100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender MUSTANG GT100 in the language / languages: English as an attachment in your email.

The manual is 9,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info