607106
3
Zoom out
Zoom in
Previous page
1/7
Next page
CHANNEL 1 INPUT (1/4" Phone)- Plug-in connection
for instruments. This balanced input can handle as
much as 8V R.M.S.
CHANNEL 1 VOLUME- This control adjusts the pream-
plifier gain of channel 1. It works in conjunction with
the Master Volume control (item H) to set the overall
loudness of the amplifier for Channel 1 only. Being a
true “gain” control, it allows for the use of a variety of
microphones, keyboards or other instruments with dif-
fering output signal levels. Low-level instruments gen-
erally require a higher Channel Volume setting, while
“hotter” keyboards require a lower Channel Volume
setting.
CHANNEL 2 - This channel is provided for an addi-
tional instrument. Its input and volume control operate
in the same manner as items A and B in channel 1.
This channel is muted when nothing is plugged into its
input, and thus will contribute no additional noise to
the amplifier output when left unused. Both channels
may be used simultaneously, however Channel 1
should be used first if only one input is needed.
EQUALIZER- The equalizer allows precise adjustments
of the tonal characteristics of the amplifier. Each con-
trol provides a 12 dB boost or cut to bands of frequen-
cies centered about 100, 338, 1188, and 4000 Hz.
REVERB CONTROL- This control adjusts the amount
of reverb to be mixed with the dry signal. The input to
the reverb assembly is the sum of Channels 1 and 2.
EFFECTS SEND JACK- This jack provides an unbal-
anced output signal from the preamp. This output can
be used with the Effects Return jack (item G) as a patch
point for mono effects devices. The Effects Send is
connected to the input of the effect (digital delay or
other effects device) and the output of the effect is con-
nected to the Effects Return jack (Item G). The Effects
Send can also be used to provide a signal to a record-
ing or sound reinforcement mixer. In addition, this
output can be used to drive another KXR 60 used as a
slave amp. This is done by connecting a standard gui-
tar cord from the Effects Send jack of the master amp
to the Effects Return jack of the slave amp.
A.
B.
C.
D.
E.
F.
KXR 60 FRONT PANEL FUNCTIONS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender KXR 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender KXR 60 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info