442989
6
Zoom out
Zoom in
Previous page
1/20
Next page
Frontman™ 65R Amplifier
6
f e n d e r . c o m
Your new Frontman 65R amplifier delivers world–class
Fender
®
tone and world–standard Fender
®
quality:
65W output power into 8 ohms
Selectable Normal and Drive channels with
independent volume and tone controls
MID-CONTOUR button furnishes many different
variations in distortion—from Rock to Blues to Metal
to whatever!
Classic Fender
®
spring Reverb
Fender
®
“touch-sensitive” circuit design simulates
the feel of tube distortion
PRE-AMP OUT and POWER-AMP IN jacks allow you
to connect external effects devices, other amplifiers or
sound/recording equipment to your FM 65R
FOOTSWITCH jack for use with the 1-button Fender
®
footswitch (included). The footswitch provides remote
channel selection
Thank you for choosing Fender
®
—The World’s most
popular instrument amplifiers—since 1946
A. INPUT - Plug your guitar in here. INPUT 1 is
normal sensitivity for most guitars, INPUT 2 is
lower sensitivity for guitars with high output (active)
pickups.
B. VOLUME - Adjusts the loudness of the Normal
channel.
C
.
TREBLE/BASS - Adjusts the high- and low-frequency
tones of the Normal channel.
D
.
DRIVE - Adjusts the distortion level in the Drive
channel. Use together with VOLUME-{F} to adjust
the overall loudness of the Drive channel.
E. CHANNEL INDICATOR -
LED OFF
n
Normal channel is active
LED ON
Ôn
Drive channel is active
F. VOLUME - Adjusts the loudness of the Drive channel
together with DRIVE {D}.
G. CHANNEL SELECT
-
Button OUT selects the Normal channel
Button IN selects the Drive channel
H. TREBLE/MID/BASS - Adjusts the high-, middle-,
and low-frequency tones of the Drive channel.
I
.
MID-CONTOUR - Activates a “scooped” midrange
EQ useful for modern distortion sounds in the Drive
channel.
J. REVERB - Adjusts the Reverb level for both
channels.
K. FOOTSWITCH - Connect the 1-button Fender
®
footswitch (included) at this jack to enable remote
channel selection. When plugged in, the footswitch
overrides the CH SELECT button.
L. PRE OUT/PWR IN - (1) Effects Loop - Connect PRE
OUT to an effects device input, then connect the
effects device output to PWR IN. (2) Multiple Amps
- Connect the primary unit’s PRE OUT to the auxiliary
unit’s PWR IN. The primary unit is used to control
all auxiliary amps. (3)‑Recording or Reinforcement
- Connect PRE OUT to sound equipment’s input.
Both jacks use a TS (Tip-Sleeve) standard
type plug for connections. PRE OUT includes
onboard tone shaping.
M. POWER INDICATOR - Lights up when the amplifier
is on.
N. POWER
- Switches the amplifier on
and off.
O. POWER CORD SOCKET - Connect
the included power supply cord in
accordance with the voltage and
frequency ratings listed on the rear
panel of your amplifier.
INPUTS
1 2
VOLUME
TREBLE BASSMID
VOLUME
TREBLE BASSMID
DRIVE
REVERB
FOOT
SWITCH
PRE
OUT
PWR
IN
F EN D E R M U SI C A L IN ST RU M E NT S
CH SELECT MID
CONTOUR
MORE DRIVE
TREBLE
MID BASS
INPUTS
1 2
VOLUME
TREBLE BASS
DRIVE
VOLUME
REVERB
CH SELECT
FOOT
SWITCH
PRE
OUT
PWR
IN
F E N D ER M US I CA L IN S T R U ME N TS
MID
CONTOUR
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Frontman 65R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Frontman 65R in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info